778516
14
Zoom out
Zoom in
Previous page
1/22
Next page
1. Undo the two quick-release levers 12 on the handle mount.
2. Set the handle to the desired height.
3. Check whether the serrations of the locking washer engage correctly in the
handle mount 11 .
4. Flick the quick-release levers 3.
Adjusting the cutting height
You can set the cutting height between approximately 20 and 70 mm. The cutting
height lever 8 can be engaged in 7 positions.
1. Hold the device by the carry handle 7.
2. Pull the cutting height lever 8 out of its arrester.
3. Slide the cutting height lever 8 to the desired level.
The device lifts or lowers.
4. Engage the cutting height lever 8 properly again.
Preparing for operation
Only use an extension cable if the included cable is insufficient for mowing the entire
lawn. Avoid using more than one extension cable.
1. Check the device, the collecting bag and the blade before connecting the power
supply.
2. Set the desired cutting height before connecting the power supply.
3. Check the handle position and correct it if necessary to work comfortably.
4. Lay out the power cable all along the perimeter of your lawn.
5. Secure the power cable on the pull relief 2 (see Fig. H ).
6. Plug the power cable plug into a properly installed socket.
Turning the motor on and off
Caution! Blade keeps moving
The motor is activated by means of a safety switch. When you let go of the safety bar,
the motor stops. Only turn on the motor on the grass.
1. Place the device on the grass.
2. Press and hold the button of the safety switch 16 .
3. Pull the safety bar 17 towards the handle.
The motor starts.
4. Let go of the safety switch button and keep the safety bar pressed to the handle
as long as you operate the motor.
Letting go of the safety bar stops the motor. The blade keeps running. Wait until the
blade has stopped before handling the device.
Operation
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex GLM44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex GLM44 in the language / languages: English as an attachment in your email.

The manual is 0.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex GLM44

Ferrex GLM44 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info