778516
12
Zoom out
Zoom in
Previous page
1/22
Next page
3. Place the bottom part of the handle on the handle mount 11 . Check whether
the serrations of the locking washer engage correctly in the handle mount.
The holes of the handle mount, the connecting pieces and the bottom part of
the handle must point towards each other.
4. Twist the quick-release levers 12 all the way into the handle mount 11 .
Do not use excessive force; it is sufficient to twist in the quick-release lever until
you feel a resistance.
5. Flick the quick-release lever 12 . If it is too tight, turn the quick-release lever one
turn backwards.
The bottom part of the handle is connected to the lawn mower and does not wobble.
Mounting the handle grip on the bottom part of the handle
1. Position the pull relief 2 on the crossbar of the handle bottom part 4.
2. Place the handle grip 1 onto the bottom part of the handle 4.
The connection cable must not lay between the handle parts and should run
beneath the handle instead.
3. Align the holes of the handle parts with each other and push the screws 3a
from the inside through the handle.
4. Put the washers 3b onto the screw and turn the quick-release levers 3
approximately 5 to 7 turns.
5. Align the handle grip 1 straight on the bottom part of the handle 4 and keep
it in position.
6. Align the screw heads.
The screw heads are bent and latch into the handle bar.
7. Flick the quick-release levers 3. If it is too tight, turn the quick-release lever
one turn backwards.
8. Check whether the handle grip 1 is aligned and connected to the bottom part
of the handle 4 without wobbling.
9. Attach the connection cable 10 with two cable clamps 15 onto the handle
frame.
The connection cable must run beneath the crossbar of the bottom part of the
handle.
The handle parts are mounted and solidly connected.
Preparing the collecting bag
The collecting bag is partially assembled on delivery.
1. Pull the plastic rims of the collecting bag 5 from the inside over the steel frame.
Before first use
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex GLM44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex GLM44 in the language / languages: English as an attachment in your email.

The manual is 0.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex GLM44

Ferrex GLM44 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info