724597
42
Zoom out
Zoom in
Previous page
1/44
Next page
1100W Garden Pump
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. GFP1101 • 01/2020 • 12699
(toll free)
40
Problem
Possible Cause Solution
Inadequate
output.
Suction height.
Check the lter.
Check intake hose is in water.
Check the height of the
outlet.
Check hose diameter and
length.
Check the suction height of the
intake hose. It must not exceed 7
metres.
Clean or replace.
Check the intake hose is deep
enough and air is not being drawn in.
Must not exceed 42M.
NOTE: The higher the outlet, the
ow is less.
Hoses / pipes should be min 19mm
or performance will be reduced.
Pump cycles on &
o in Automatic
Mode.
Leak in pipe work.
Damage to sensor.
A small leak is sucient to cycle the
pump. Check ALL plumbing.
Check one of the supplied ttings are
used on outlet of pump.
Take to service centre.
Pump constantly
needs priming.
Non-return valve. Remove and check the non-return
valve.
Clean or if damaged, replace.
Water ows through
pump when pump
is o in time mode.
Check height of water inlet. Water pressure on inlet must not
exceed 0.5PSI or 0.4 metres in height.
Increase the height of the mounting
of the pump to achieve the above.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex GFP1101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex GFP1101 in the language / languages: English as an attachment in your email.

The manual is 8,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info