724597
41
Zoom out
Zoom in
Previous page
1/44
Next page
AFTER SALES SUPPORT
(toll free)
1100W Garden Pump
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL: №. GFP1101 • 01/2020 • 12699
39
Problem
Possible Cause Solution
Motor fails to start.
No mains supply.
Check display for mode.
In Ever run mode.
In Automatic Mode.
In time mode.
Internal Thermal Cut out.
Check power point is turned on.
Check mains fuse or circuit breaker.
Check power point with another
working appliance.
If power point is working, and no
display on pump, take pump to
service centre.
Change mode to Ever run mode to
ensure pump is operating.
Take to service centre.
Open outlet tap to ensure full ow.
Take to service centre.
Reset time function.
Take to Service centre.
If pump has been running contin-
ually disconnect and leave for 20
minutes and then retry.
Take to service centre.
No water intake.
Intake water line not in water.
Pump has not been primed
correctly.
Air on intake side of pump.
Intake valve not sealing.
Intake lter restricted.
Suction height.
In Automatic Mode.
Check the intake hose.
Lower the intake further into water.
Remove lter and non-return valve
and ll pump with water. Re assem-
ble.
Check the tting into the pump and
connection. Must be fully sealed.
Check the intake hose has not
collapsed or has been split.
Remove lter and non-return valve.
Clean lter and valve and replace.
Replace if these parts are damaged
or cannot be cleaned.
Check the suction height of the
intake hose. It must not exceed 7
metres.
Check the outlet tap is open.
Troubleshooting
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex GFP1101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex GFP1101 in the language / languages: English as an attachment in your email.

The manual is 8,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info