779780
16
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
20
that operating staff, helpers or onlookers may get injured. A chainsaw has
been designed for use with both hands.
Wear your Personal Protective Equipment (PPE), consisting of:
Cut-resistant and non-slip safety shoes, cut-protection trousers, hi-vis
vest or jacket in signal colours, gloves and a helmet with visor and hear-
ing protection.
When starting the chainsaw or cutting with it, no other people should be
close to you. Ensure onlookers and animals cannot get into the working
environment.
When the motor is running, all body parts must point away from the
chainsaw.
Safety notices for handling flammable fuels
1. WARNING!: Petrol is easily flammable!
2. Store petrol in containers that have been designed specially for this pur-
pose.
3. Refill with petrol when you are outdoors, and do not smoke.
4. Refill with petrol before starting the motor. Never remove the fuel tank fill-
er cap or refill with petrol while the motor is running or when it is still hot.
5. When fuel has been spilled, do not start the motor but remove the ma-
chine from the area of the spilled fuel and avoid all ignition sources until
all petrol fumes have dispersed. Put the cap back securely on the fuel tank
and on the canister.
Refuelling
Turn off the motor before refuelling.
m CAUTION! Always open the fuel filler cap carefully so the existing pressure
can be released slowly.
High temperatures are generated on the casing during work. Before refu-
elling, allow the machine to cool down fully.
m CAUTION! If the machine has not cooled down sufficiently, the fuel could
ignite during refuelling and cause severe burns.
Ensure that the tank is not overfilled. If you spill any fuel, it has to be
wiped away immediately and the machine must be cleaned.
Always close the screw plug on the fuel tank properly, so loosening is pre-
vented from vibrations during operation.
Safety regulations
16


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info