779780

Ferrex FPCS46 E1 Manual

14
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
18
Only cut timber. Do not use the chainsaw for work for which it is not suita-
ble. Do not use the chainsaw for cutting plastic, masonry or building ma-
terials which are not made of wood, for example.
17. The power tool produces poisonous exhaust fumes as soon as the motor
starts. Never work in closed or badly-ventilated rooms.
18. In order to locate significant damage or faults, it is necessary to inspect the
machine before use and after dropping or other impacts.
19. If liquid is spilled when filling the oil or fuel tank, the machine must be
cleaned before use.
20. National regulations may restrict the use of the appliance.
21. Petrol is highly flammable! When filling the tank, keep at a distance from
open flames and do not smoke. There is a risk of fire!
22. Fill the chain oil only when the engine is switched off and cooled down.
There is a risk of fire!
23. Only adjust guide-bar and chain with stopped engine
As a chainsaw user, you must follow several points in order to carry out
your sawing work without accidents and injuries.
1. A basic understanding of kickback can reduce or exclude the element of
surprise. Sudden rash reactions can lead to accidents.
2. When the motor is running, hold on to the saw tightly with both hands,
with the right hand on the handle at the back and the left hand on the
handle at the front. Thumbs and fingers must firmly clasp the chainsaw‘s
handles. A secure hold helps you to absorb kickback and keep the saw
under control. Do not let go.
3. Ensure that the area where you are cutting is free from obstacles. The tip
of the chain bar must not come in contact with tree trunks, branches and
similar when cutting with the saw.
4. Use a fast motor speed.
5. Do not lean too far forwards and do not cut above your shoulder height.
6. Sharpen and maintain the chainsaw in accordance with the manufactur-
er‘s instructions.
7. If the tool becomes jammed during cutting, it has to be turned off imme-
diately and freed carefully. Afterwards, the machine has to be checked for
damage (e.g. bent chain bar) and a test run has to be carried out.
8. For felling or cross-cutting, the spike bar (claw stop) must be applied to
the wood to be cut. The use of the spike bar is also recommended when
cutting through thick branches.
Safety regulations
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info