779786

Ferrex FM 300 Manual

17
Zoom out
Zoom in
Previous page
1/27
Next page
Preparation
17
− Do not mount the tools so that they could come into contact with your
hand. For example, do not allow the blades to point towards your hand.
CAUTION!
Risk of injury!
When flipping the clamping lever, the clamping mechanism generates a large
amount of spring force, which will snap the clamping lever back and may injure
you.
− Always completely flip the clamping lever by 180° or up to the stop point
before you let go of the clamping lever.
− Avoid having the clamping lever come into contact with other objects
when in an open state. Otherwise, it can easily spring back.
− Make sure that your fingers are not clamped in while mounting the tool.
The tool may only be mounted once the extractor line 14 has been secured.
To ensure the safety and quality of the work, only use undamaged fitted tools in good
condition.
The tool holder 6 of the multifunction tool enables you to mount the tool in
different positions using the quick release mechanism.
1. Open the clamping lever 2 all the way by flipping it up to the stop point
(see Fig.C). If applicable, remove any fitted tool that is already mounted.
2. Place the tool on the tool holder at the desired angle (see Fig.E). When using the
plunge-cut saw blade 7 and the scraper 10 , make sure to insert the tools the
right way around (see Fig.F).
3. Engage the locking bracket 1 (see Fig.D).
4. Close the clamping lever so that it locks into place.
5. Ensure that the tool is securely fixed in place.
Placing the sanding sheet on the sanding plate/changing the sanding sheet
Attach the desired sanding sheet 11 to the sanding plate 9 with the hook and
loop fastener. Make sure that the sanding sheet is not protruding.
The sanding sheet must be completely attached to the sanding plate with the hook
and loop fastener and must be smooth.
To ensure best dust extraction, make sure that the holes in the sanding sheet
correspond to the holes on the sanding plate.
− To remove the sanding sheet, take hold of it by the tip and pull it off of the
sanding plate.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FM 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FM 300 in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info