779786
16
Zoom out
Zoom in
Previous page
1/27
Next page
Preparation
16
Preparing the multifunction-tool
WARNING!
Risk of injury!
Accidentally starting the multifunction tool may result in severe injury.
Before attaching tools, pull the mains plug out of the socket.
Mounting the handle
Screw the handle 12 into the thread 5.
Make sure that you screw the handle onto the left side of the multifunction tool if
you are right-handed and onto the right side if you are left-handed.
Connecting the dust extractor
WARNING!
Health hazard!
Improper dust extraction could cause injury to health.
Read and observe the chapter on safety “Safety instructions for dust
extraction” at the beginning of this user manual.
1. Use the two hooks on the front metal housing and the rear holding clip 15 on the
bottom of the multifunction-tool to secure the extractor line 14 (see Fig.B).
Make sure that the extractor line is correctly connected to the multifunction tool
and that the holding clip has locked into the recess.
2. Attach the dust extraction adapter 13 to the connecting nozzle of the extractor
line and turn the dust extraction adapter anticlockwise until tight.
3. Connect a suitable suction device to the dust extraction adapter (e.g. shop vacuum
cleaner).
Mounting tools
WARNING!
Risk of injury!
If you mount the tools incorrectly and they are therefore able to come into
contact with your hand during use, there is a risk of injury.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FM 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FM 300 in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info