724612
22
Zoom out
Zoom in
Previous page
1/42
Next page
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
1300 889 028
(toll free)
e-mail: info.aldi@positecgroup.com
MODEL: №. 10084 • 08/2019 • FCS4800A
20
Using the Chainsaw
1. Once the engine is started, and the front guard
/ chain brake (13) is released (Fig A), press in the
safety lever (2), and then the throttle trigger (3)
(Fig Z), and the chain will start operating. To
engage full speed of the chain, pull the throttle
trigger (3) inwards fully.
2. To stop the chain operating, release the throttle
trigger (3), and the safety lever (2) (Fig AA).
Stopping the Chainsaw
1. Press down the on/o switch (4) to the “O
position as indicated by an “O” (Fig AB).
NOTE: Especially after the rst starting of the
chainsaw, the tension of the chain should be
checked. The chain will become loose on the
rst start up and will require adjustment. Refer
to the Changing / Replacing the Guide Bar and
Chain section.
Checking the Oil supply
Run the engine at medium speed and check that
the chain splatters a thin line of oil which can be
seen on the ground when the guide bar (19) is
pointed downwards (Fig AC). DO NOT ALLOW THE
TIP OF THE BAR touch ANY surface when checking
the oil ow. Keep the chain (20) and guide bar (19)
well clear of ANY surface. This visual thin line of
oil is normal and is an indication the oil system is
oiling the guide bar (19) and chain (20).
NOTE: For rst time use the oil may take a few
minutes to work through the oil system.
The oil pump is ONLY operating while the chain
(20) is rotating so at idle the oil is NOT being
pumped through the oil system. If there is no line
of chain oil after a few minutes, stop the engine
immediately and investigate the cause.
The oil tank (6) could be empty or the oil supply to
the chain blocked. This may require removal of the
guide bar (19) and checking that the upper oil hole
in the bar is clear of any blockages (Fig AD).
AC.
Z.
AA.
AB.
Operation
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FCS4800A in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info