734919
20
Zoom out
Zoom in
Previous page
1/30
Next page
Operation
20
Level Stroke rate
1-2 low stroke rate
3-4 medium stroke rate
5-6 high stroke rate
The stroke rate should be high enough to make smooth cuts in the
material.
When sawing hard materials, you should select a lower stroke rate
and a saw blade with fine toothing.
When sawing soft materials, you should select a higher stroke rate
and a saw blade with coarser teeth.
The motor could overheat when cutting at the lowest stroke rate for a
prolonged period of time. For this reason, take frequent work breaks
of approx. 15minutes so that the motor can cool down.
Setting the pendulum stroke
You can adjust the cutting speed, cutting performance and cutting pattern to the
workpiece to be machined.
The pendulum stroke adjustment
9
allows you to adjust how strongly the saw
blade’s
15
pendulum moves for the stroke.
Set the pendulum stroke adjustment to one of the following positions:
Position 0 = no pendulum movement
Material: Aluminium, steel
Notice: For fine and cleanly cut edges, thin materials (e.g. as sheets) and hard
materials.
Position 1 = small pendulum movement
Material: Plastics, wood, aluminium
Notice: For hard materials
Position 2 = mid-size pendulum movement
Material: Wood
Position 3 = large pendulum movement
Material: Wood
Notice: For soft materials and sawing in the direction of the grain
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAPS 20-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAPS 20-I in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAPS 20-I

Ferrex FAPS 20-I User Manual - German - 32 pages

Ferrex FAPS 20-I User Manual - French, Italian - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info