734924
21
Zoom out
Zoom in
Previous page
1/31
Next page
Cleaning and maintenance
21
Scraping
For best results, the scraper
13
must be sharpened regularly.
Work on a soft base (e.g. wood) at a flat angle and while applying minimal
contact pressure. Otherwise, the scraper could cut into the surface.
Select a moderate to high oscillation rate for scraping.
Sanding
Select a high oscillation rate for sanding.
Follow the instructions below for proper sanding:
Move the multifunction tool parallel and circularly over the surface or alternately
in longitudinal and transverse directions.
The material removal rate and sanding quality are primarily determined by
the selection of the sanding sheet
14
, the preselected oscillation rate and the
pressing force.
Press the multifunction-tool evenly and not too hard against the workpiece.
Pressing too strongly does not increase performance.
Only work with the tip or an edge of the sanding plate
11
to sand profiles and
fillets. The sanding sheet can heat up significantly when sanding individual
points. Reduce the oscillation rate and contact pressure and let the sanding sheet
cool off regularly.
Do not use the multifunction tool with liquid polishing agents or abrasives.
If only one corner is worn down, move the sanding sheet
14
by 120°.
Cleaning and maintenance
WARNING!
Risk of injury!
Accidentally starting the multifunction tool may result in severe
injury.
Take the rechargeable battery out of the multifunction tool
before cleaning or performing any maintenance on the
multifunction tool.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAM 20-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAM 20-I in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAM 20-I

Ferrex FAM 20-I User Manual - German, French, Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info