734924
19
Zoom out
Zoom in
Previous page
1/31
Next page
Preparation
19
CAUTION!
Risk of injury!
When flipping the clamping lever, the clamping mechanism
generates a large amount of spring force, which will snap the
clamping lever back and may injure you.
Always completely flip the clamping lever by 180° or up to the
stop point before you let go of the clamping lever.
Avoid having the clamping lever come into contact with other
objects when in an open state. Otherwise, it can easily spring
back.
Make sure that your fingers are not clamped in while
mounting the tool.
The tool may only be mounted once the extractor line
15
has been secured. To
ensure the safety and quality of the work, only use undamaged fitted tools in good
condition.
The tool holder
8
of the multifunction tool enables you to mount the tool in
different positions using the quick-release mechanism. Make sure that the fitted tool
is only attached from the right side (see Fig. F).
1. Open the clamping lever
1
all the way by flipping it up to the stop point (see
Fig.C). If applicable, remove any fitted tool that is already mounted.
2. Place the desired tool
9
/
10
/
11
/
12
or
13
at the desired angle on the tool
holder
8
. When using the plunge-cut saw blade
9
and the scraper
13
, make
sure to insert the tools the right way around (see Fig.F).
3. Hold the clamping lever in the hand and carefully hold it back as far as it will go
against the locking bracket
2
.
4. Engage the locking bracket (see Fig.D) and close the clamping lever so that it
locks into place.
5. Ensure that the tool is securely fixed in place.
Placing the sanding sheet on the sanding plate/changing the sanding sheet
Attach the desired sanding sheet
14
to the sanding plate
11
with the hook and
loop fastener. Make sure that the sanding sheet is not protruding. The sanding
sheet must be completely attached to the sanding plate with the hook and loop
fastener and must be smooth.
To ensure best dust extraction, make sure that the holes in the sanding sheet
correspond to the holes on the sanding plate.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAM 20-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAM 20-I in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAM 20-I

Ferrex FAM 20-I User Manual - German, French, Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info