779800
27
Zoom out
Zoom in
Previous page
1/42
Next page
25
Before starting the equipment/Assembly
VII. Before starting the equipment
Open the packaging and remove the device carefully.
Remove the packaging material as well as the packaging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for transport damage.
If possible, store the packaging until the warranty period has expired.
m ATTENTION
The device and packaging materials are not toys! Children must not be allowed to play
with plastic bags, film and small parts! There is a risk of swallowing and suffocation!
The equipment must be securely installed, i.e. bolted down on a workbench, base frame or
similar. To do this, use the holes located on the inside of the frame feet.
All covers and safety devices have to be properly fitted before the equipment is switched on.
It must be possible for the blade to run freely.
When working with wood that has been processed before, watch out for foreign bodies such
as nails or screws, etc.
Before you switch ON the machine, check that the saw blade is fitted correctly. Moving parts
must run smoothly.
Before you connect the equipment to the power supply make sure the data on the rating
plate are identical to the mains data.
VIII. Assembly
Risk of injury!
Incorrectly assembling the table saw can result in serious injury.
Before start-up, assemble the table saw properly and completely, including all covers and
safety devices.
Do not in any case insert the mains plug in the socket until you have completed assembly.
Hexagon screws must each be inserted from outside inwards. During assembly nuts and
screws must only be tightened until hand-tight, so that they cannot fall out. If you tighten
the nuts and screws fully before final assembly, the circular table saw cannot be erected in a
correct and stable manner.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DX254TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DX254TS in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info