779800
24
Zoom out
Zoom in
Previous page
1/42
Next page
22
Safety regulations
Safety instructions for handling saw blades
1. Only use tools which you know how to handle.
2. Pay attention to the maximum speed. The maximum speed stated on the
tool being used must not be exceeded. Keep within the speed range if one
is specified
3. Note the direction of rotation of the motor and saw blade.
4. Do not use any insertion tools with cracks. Sort out cracked insertion tools.
Repairs are not permitted.
5. Clean grease, oil and water off of the clamping surfaces.
6. Do not use any loose reducing rings or bushes to reduce holes on circular
saw blades.
7. Make sure that fixed reducer rings for securing the insertion tool have the
same diameter and have at least 1/3 of the cutting diameter.
8. Make sure that fixed reducer rings are parallel to each other.
9. Handle the tools used with care. It is best to store these in their original
packaging or special containers. Always wear protective gloves to improve
your grip and further reduce the risk of injury.
10. Before using any of the tools, ensure that all protective devices are correctly
attached.
11. Before use, ensure that all of the tools used by you full the technical re-
quirements of this power tool and are properly attached.
12. The saw blade supplied should only be used for sawing wood and never
for working metal.
13. Use the saw blade intended for the material to be processed.
14. Only use a saw blade with a diameter which is marked on the saw.
15. Only use saw blades marked with a speed equal to or higher than the
speed marked on the power tool.
16. Only use saw blades recommended by the manufacturer which, if intend-
ed for cutting wood or similar materials, comply with EN 847-1.
17. Wear suitable personal protective equipment, such as:
– hearing protection;
– protective gloves when handling saw blades.
18. Only use saw blades recommended by the manufacturer that comply
with EN 847-1. Warning! When changing the saw blade, make sure that the
cutting width is not smaller and that the thickness of the saw blade is not
greater than the thickness of the splitter.
19. When sawing timber, avoid overheating the saw teeth.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DX254TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DX254TS in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info