779800
23
Zoom out
Zoom in
Previous page
1/42
Next page
21
Safety regulations
Safety instructions for the operation of circular table saws
a) Switch off the circular table saw and disconnect it from the power sup-
ply before removing the table insert, changing the saw blade, imple-
menting settings on the riving knife or the saw blade protective cover,
and if the machine is left unattended. Precautionary measures serve to
prevent accidents.
b) Never leave the circular table saw running unattended. Switch off the
electric tool and do not leave it until it has come to a complete stand-
still. An unattended running saw poses an uncontrolled risk.
c) Set up the circular table saw in a location that is level and well venti-
lated, and where it can stand safely and remain balanced. The instal-
lation site must provide sufficient space for easily handling the size
of your workpieces. Disorganised and unlit working areas, and uneven,
slippery floors may lead to accidents.
d) Regularly remove chips and sawdust from beneath the saw table and/
or from the dust extraction system. Accumulated sawdust is flammable
and can self-ignite.
e) Secure the circular table saw. If a circular table saw is not secured correct-
ly, it can move or topple.
f) Remove the adjustment tools, wood residues, etc. from the circular ta-
ble saw before switching it on. Deflections and possible jams could be
dangerous.
g) Always use the right size of saw blade and an appropriate location
hole (e.g. diamond-shaped or round). Saw blades that do not fit with
the mounting parts of the saw will run out-of-centre and result in a loss of
control.
h) Never use damaged or incorrect saw blade mounting materials, such
as flanges, washers, screws or nuts. These saw blade mounting materials
have been specially designed for your saw, for optimum performance and
operational safety.
i) Never stand on the circular table saw and do not use it as a step stool.
Serious injuries can arise if the electric tool topples or if you accidentally
come into contact with the saw blade.
j) Make sure that the saw blade is mounted in the correct direction of
rotation. Do not use grinding discs or wire brushes with the circular
table saw. Incorrect assembly of the saw blade or the use of accessories
that have not been recommended can result in serious injuries.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DX254TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DX254TS in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info