724611

Ferrex CLM80XA Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
80V Lithium-Ion 20” Brushless Lawn Mower
MODEL: №. 10094 • 08/2019 • CLM80XA
15
2) Pick up the grass collection bag (16) by the handle,
position the rods of the collection bag (16) onto the
hooks on both sides of the rear discharge chute. (See
Fig. C2)
3) Release the rear discharge guard (15), ensuring
the guard (15) aligns correctly and ts fully into the
grooves of the collection bag (16). (See Fig. C3)
Removing / Emptying the grass collection bag (16)
- Removing (See Fig. D)
WARNING! Before you remove the grass
collection bag (16), switch o the mower,
remove the battery pack, and ensure the blades
have come to a stand still, and the engine is
cooled.
Raise the rear discharge guard (15) and hold it up.
Lift the grass collection bag (16) by the handle, and
remove the rods of the grass collection bag (16) from
the hooks on both sides of the rear discharge chute.
WARNING! Always check the rear discharge
guard (15) closes tightly before using.
Never lift the rear discharge guard (15) when the
lawn mower is in operation.
Emptying
As soon as you see mown grass debris on the lawn,
the grass collection bag (16) needs to be emptied.
1) Empty the grass clippings from the grass collection bag (16) into the
appropriate bin. Check with your local council for more information. Ret
grass collection bag (16) per previous instructions.
2) If any grass clippings are caught in the rear discharge chute, clean it using
a broom or similar extension.
3) Do not remove grass debris from under the deck, or on/around the
blades by hand or with your feet. Instead use suitable tools such as a brush
or broom.
4) To ensure that the grass clippings can be blown into the grass collection
bag (16), the rear discharge chute, and the inside of the mower deck must
be cleared of any blockage.
C3.
D.
C2.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex CLM80XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex CLM80XA in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info