724611
15
Zoom out
Zoom in
Previous page
1/32
Next page
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
80V Lithium-Ion 20” Brushless Lawn Mower
MODEL: №. 10094 • 08/2019 • CLM80XA
13
WARNING: Remove the
battery pack before
assembling the mower!
Assembling the lower handle (4)
1) Attach the lower handle (4) to
the 2 slots positioned on both sides
above the rear wheel (11). Be sure to align the holes
on the lower handle (4) to the cylinders on the
slots. (See Fig. A1)
2) Align and insert the inner locking screw for
lower handle (7) into the aligned top holes on the
slot from the inside of the lower handle. Insert the
outer locking knob for lower handle (14) into the
end of the inner locking screw (7). Turn the locking
knob (14) clockwise to tighten. (See Fig. A2)
3) Repeat step 2 to the other side of the lower
handle (4). Check to see if the lower handle (4) is
locked in place. (See Fig. A3)
Assembling the upper handle (2)
1) Attach the 2 ends of the upper handle (2) onto
the outer sides of the lower handle (4) and hold in
position. Be sure to align the holes between the lower
handle (4) and the upper handle (2). (See Fig. B1)
2) Insert the outer locking lever with washer for
upper handle (5) into the aligned holes from
outside of the upper handle (2). Align and insert
the inner fastener for upper handle (6) into the end
of the outer locking lever (5) from the inside of the
lower handle (4). (See Fig. B2)
3) Attach the inner fastener for upper handle (6)
close to the lower handle (4). Rotate the outer
locking lever (5) clockwise about 2-3 turns. Do not
over tighten. (See Fig. B3)
Assembly
A1.
A2.
A3.
B1.
1
2
3
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex CLM80XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex CLM80XA in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info