632779
4
Zoom out
Zoom in
Previous page
1/104
Next page
EN
4
WELDING HELMET
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2.
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Introduction
High quality variable shade 9-13 cartridge
manufactured and tested to EN379. Fully
automatic, switches from light to dark on striking
arc. Fitted with solar power panel, no batteries
required. Features sensitivity and delay speed
control for switching dark to light, preventing
arc eye when welding at high power, whilst still
providing fast switching for tack welding. Deluxe
contoured helmet design approved to EN175
gives full neck protection and protects lens from
scratching when helmet is laid down. Comfortable
headband and non slip quick release ratchet
mechanism. Suitable for MIG, TIG and arc
welding. (Not suitable for use with laser or gas-
welding).
Contents
1. Technical data
2. Safety instructions
3. Instruction for use
4. Maintenance
1. Technical data
Technical specifications
Viewing area 95 x 47.5 mm
Size of Cartridge 110 x 90 x 9 mm
Optical class 1/1/1/2
UV/IR Protection Up to shade DIN 16 at all times
Light state DIN 3.5
Variable shade DIN 9 to 13
Power Supply Solar cells. No battery change required
Power On/Off Fully automatic
Sensitivity Adjustable
Switching time 1/25000 sec. from light to dark
Delay time 0.1 - 1.0 sec.
Operating temperature -5° C to +55° C
Storing temperature -20° C to +70° C
Helmet material High-impact resistant
plastic/polyamide Nylon
Total weight 440 g
2. Safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
This helmet is not suitable for use with
laser or gas-welding.
• Ensure all workshop safety rules, regulations,
and conditions are complied with when using
welding equipment.
• The helmet will not offer protection against
mis-use of workshop tools, equipment, or
accessories.
• Maintain the helmet in good condition, and
protect cartridge from liquid and dirt contact.
• Regularly replace the protective lens and
replace any damaged or worn parts.
• Use genuine parts only. Non authorized parts
may be dangerous and will invalidate the
warranty. NEVER open or tamper with the
shade cartridge.
• Select the shade level before use.
• Ensure the front cover lens is securely in
place before use.
• Fit the helmet and adjust the head band so
the helmet will sit as low and near to your face
as possible,
• Use helmet only in temperatures ranging from
-5° C to 55° C.
• The eye protective plate in helmet is NOT
unbreakable. Helmet will not protect you
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm WEA1057 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm WEA1057 in the language / languages: All languages as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info