818305

Ferm VCM1008 Manual

14
Zoom out
Zoom in
Previous page
1/44
Next page
14
EN
28 Fiilter cleaning button
29 Detergent tube
30 Detergent inlet
31 Detergent outlet
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Attaching the wheels (Fig. B)
1. Press the castor wheels (18) into the base of
the machine
2. Use the supplied screws (21) to attach the rear
wheels (19) to the base
Attaching the detergent tank (Fig. C-1, C-2,
C-3)
1. Fit the detergent tank (16) on the base of the
machine
2. Press the detergent tank (16) onto the stainless
steel container (3) and secure it.
Install the filters (see next paragraph) before
proceeding to attach the detergent tube (29) to
the top section (2).
Filters (Fig. D-2, D-3, D-4, D-5)
Ensure to mount the correct filter,
depending on the intended application of
the machine.
For dry vacuum cleaning:
1. Place the HEPA filter (4) in the filter cage (22).
2. Fit the filter cage (22) and water separator (23)
onto the top section (2) of the vacuum cleaner.
3. Insert the shut-off float (24) and turn clockwise
to lock it in place (fig. D-2).
4. Optional/recommended: Place a dust bag (7)
in the container (3) (fig. D-3).
5. Install the top section (2) on the container (3)
and secure using the clamps (17) (fig. D-4,
D-5).
6. Connect the detergent tube (29) to the inlet
(30) on the top section (2) (fig. C-2).
For wet vacuum cleaning:
1. Slide the foam filter (6) onto the filter cage (22).
2. Fit the filter cage (22) and water separator (23)
onto the top section (2) of the vacuum cleaner.
3. Insert the shut-off float (24) and turn clockwise
to lock it in place (fig. D-2).
4. Install the top section (2) on the container (3)
and secure using the clamps (17) (fig. D-4,
D-5).
5. Connect the detergent tube (29) to the inlet
(30) on the top section (2) (fig. C-2).
Flexible hose (Fig. E-1, E-2)
1. Insert the end of the flexible hose (14) into the
container (3) and turn clockwise to secure.
2. Connect the detergent tube (20) to the outlet
(31) on the top section (2).
Nozzle/brush (Fig. E-1, E-2)
Select a brush or nozzle depending on the
intended application of the machine.
For cleaning carpets:
1. Connect the suction tubes (12) to the handle
(13).
2. Mount the carpet cleaning nozzle (8) on the
end of the tube (12).
For cleaning furniture:
1. Remove the suction tube (12) from the handle
(13).
2. Mount the furniture cleaning nozzle (9) on the
handle (13).
For vacuuming floors:
1. Connect the suction tubes (12) to the handle
(13).
2. Mount the wet & dry floor brush (10) on the end
of the tube (12).
For vacuuming small crevices:
1. Remove the suction tube (12) from the handle
(13).
2. Mount the crevice nozzle (11) on the handle
(13).
4. OPERATION
Do not operate the vacuum cleaner
without a filter installed.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm VCM1008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm VCM1008 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info