818305

Ferm VCM1008 Manual

12
Zoom out
Zoom in
Previous page
1/44
Next page
12
EN
installed by an authorized service center.
7) Do not attach anything else to the socket,
electric cords, or extension cord.
8) Before plugging your vacuum cleaner into the
electrical outlet, make sure that the voltage and
the outlet requirements match what is indicated
on the label next to the cord.
9) Do not pull the device by the cord.
10) Your machine should always be turned off before
unplugging it from the outlet or the extension
cord.
11) Before leaving the device unsupervised (even
for a brief time) turn it off and unplug it from the
electrical outlet. This should also be done if there
is a loss of power.
12) Do not underestimate its power. Always maintain
a balanced and stable stance.
13) Keep children and pets away from the machine.
When the machine is operating, everyone should
stay at a safe distance.
14) The device should not be used by children or by
persons who are not familiar with the device or
who have not read this instruction manual.
15) The user of the device is responsible for the
safety of others while using it.
16) The vacuum should only be used for its intended
purposes.
17) Before performing any maintenance, adjustment
or cleaning procedures on the vacuum cleaner,
turn it off, unplug it from the electrical outlet, and
wait for the motor to stop.
18) Be very careful when checking, cleaning, or
performing maintenance on the device and wear
thick work gloves to protect your hands.
19) Neither the security devices nor the electric
cords should be modified or removed from the
machine.
20) When using the machine, it should be kept
steady and on a stable surface or supported by
the body.
21) Only work in full daylight or with appropriate
artificial light.
22) We recommend using some type of hearing
protection for your ears.
23) If the machine vibrates abnormally, stop the
motor and look for the cause immediately.
Vibrations usually mean a problem.
24) The vacuum cleaner should be properly checked
before each use. Do not use a machine that is
not in perfect condition. If you notice a problem
that could constitute a danger to the user, have
the machine repaired before using it.
25) For safety reasons, replace worn or damaged
parts. Use only manufacturer approved
replacement parts. Parts from sources other
than the manufacturer may not fi t properly
or may be dangerous or cause injuries. The
power cord can only be replaced by specialized
customer service centers.
26) Only use the vacuum cleaner in areas that are
dry and protected from bad weather. Do not use
it outside when it is raining.
27) Store the vacuum in a dry place, out of the reach
of children.
28) Do not leave the power cord lying around once
cleanup is done; someone could trip.
29) Take care when emptying extremely heavy
tanks.
30) To avoid spontaneous combustion, empty the
tank after every use.
31) Do not use this machine to vacuum up
flammable or combustible liquids, such as
gasoline, photocopier powder, or volatile
substances; and do not use the machine in areas
where these liquids are present. Do not vacuum
up acids.
32) Do not vacuum up any materials that are
toxic, cancer causing, combustible, or any
other dangerous materials, such as asbestos,
asbestos dust, arsenic, barium, beryllium, lead,
pesticides, or any other substances hazardous
to your health.
33) Extreme caution should be used when
vacuuming up wood or charcoal, soot, cement,
plaster, or plasterboard dust. These particles are
extremely fine and can pass through the filters
affecting the motor’s performance or be blown
into the air. If necessary, therefore we strongly
recommend a HEPA filter in combination with a
dust collection bag when cleaning these types of
materials.
34) Do not vacuum up anything that is burning or
smoldering, such as cigarettes, cigarette butts,
matches, or hot ashes.
35) Never vacuum up salt water; it may destroy the
motor.
SAFETY WARNINGS SPECIFIC FOR
BLOWING
a) Direct air discharge at work area only. Never at
people or animals.
b) Risk of flying objects. Keep bystanders away
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm VCM1008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm VCM1008 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info