812765
10
Zoom out
Zoom in
Previous page
1/36
Next page
10
EN
of complaints. The vapours can irritate the
respiratory system.
d) Use the battery only in conjunction with your
FERM AX-POWER product. This measure
alone protects the battery against dangerous
overload.
e) The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit can occur and the battery can burn,
smoke, explode or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Only charge the recommended 20V Li-ion
rechargeable battery packs. Other types of
batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction.
b) Children being supervised not to play with
the appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
Do not use the machine if the mains cable or
the mains plug is damaged.
Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use an
extension cable reel, always fully unroll the
cable.
2. MACHINE INFORMATION
Intended use
Your handheld vacuum cleaner is suitable for dry
vacuuming with the aid of the accompanying
HEPA filter. The vacuum is not intended for the
vacuum of flammable, explosive or hazardous
dusts. The vacuum cleaner may only be used
and stored indoors, in private households and in
enclosed spaces in adomestic environment at
room temperature. The device is not suitable for
commercial or industrial use.
Technical specifications
Model No. VCM1007
Voltage 20 V
Suction force ≥7 kPA, 4 m³/min
Container capacity 600 ml
Tube diameter Ø 32 mm
Weight 2.3 kg
Model No. CDA1154
Battery type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CDA1156, CDA1157,
CDA1175
Weight 0.3 kg
Model No. CDA1156
Charger input 100-200V~ 50/60Hz
Max 1A
Charger output 21.5V 1.7A
Rechargeable battery pack 20V Li-Ion 1.5Ah
Charging time 1.5Ah battery 60 minutes
Charging time 2.0Ah battery 90 minutes
Charging time 4.0Ah battery 120 minutes
Recommended batteries CDA1158, CDA1154,
CDA1155
Weight 0,15 kg
Only use the following batteries of the AX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1158 20V, 1.5Ah Lithium-Ion
CDA1154 20V, 2Ah Lithium-Ion
CDA1155 20V, 4Ah Lithium-Ion
The following charger can be used to charge
these batteries.
CDA1156 Charger adapter
CDA1157 Quick charger
CDA1175 Quick charger
The batteries of the AX-POWER 20V battery
platform are interchangeable with all the FERM
AX-POWER battery platform tools.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm VCM1007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm VCM1007 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info