Manual Ferm VCM1007 (page 12 of 36) (English, German, Dutch, French)

812765

Zoom out

Zoom in

1/36

Storage holder (14)

Put the vacuum cleaner and accessories in the

provided storage holder (14) on the wall.

Installation and assembly of the storage holder

(Fig. E)

1. Drill holes on the designated position in the

wall.

2. Mount the storage holder (14), with UP Arrow

pointing up. Mount the storage holder with

screws and plugs firmly.

3. Slide the nozzle holder in the slot until it

clamped tight.

4. Store accessories in the nozzle holder.

5. Slide vacuum cleaner with bottom side to

storage holder until the machine is locked in

place (Fig. F).

4. OPERATION

Note: Regular emptying of the dust cup and

cleaning of the filter assembly ensures optimal

vacuum capacity.

Switching on and off (Fig. A)

• To switch on the machine, slide the on/off

switch (2) to the front.

• To switch off the machine, slide the on/off

switch (2) to the rear.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with asoft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using asoft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

Cleaning the Dust Cup (Fig. C)

To maintain the optimum performance of the

vacuum cleaner, clean the dust cup (7) after each

use.

• Press the release button (3) and remove the

dust cup (7) from the motor housing (6).

• Shake/tap out the dust cup over asuitable

waste bin. If required, clean the dust cup with

amoist cloth. If required, clean the HEPA filter

(See “Cleaning the HEPA filter”).

• Reinsert the HEPA filter (16) into the dust cup (7).

• Afterwards, hang the dust cup at the bottom

into the motor housing, apply light pressure

until the dust cup can be heard engage.

Cleaning the HEPA filter (Fig. D)

• Press the release button (3) and remove the

dust cup (7) from the motor housing (6).

• Remove the HEPA filter (16) from the motor

housing by twisting the filter clockwise.

• Shake/tap the filter over asuitable waste

bin. If necessary, you can wet clean the filter

(16): Clean it under running water without any

cleaning detergent, shake/tap the filter as dry

as possible and allow the filter to dry 24 hours

in order to avoid the formation of mould.

• Assembly is carried out in reverse order.

MALFUNCTIONS

In the case of insufficient vacuuming

performance, check the following:

1. Is the dust cup (7) full?

• See “Cleaning the Dust Cup”.

2. Is the HEPA filer (16) clogged with dust?

• See “Cleaning the HEPA filter”.

3. Is the capacity of the batter pack to low?

• Make sure the battery pack is charged fully

for optimum suction capacity.

Regular emptying of the dust cup (7) and cleaning

of the HEPA filter (16) ensures optimal vacuum

capacity.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected

at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EC for Waste Electrical and Electronic

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm VCM1007 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9.12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm VCM1007 Manual

Product: