634180
7
Zoom out
Zoom in
Previous page
1/112
Next page
7
EN
Material to be processed
This powertool is intended as a stationary
machine for making straight lengthways and
crossways cuts in hard and soft wood free from
foreign bodies such as nails, screws and mortar.
ATTENTION! When using electric tools to protect
against electric shock, injury and fire the following
basic safety measures must be observed.
Make sure to read all of these instructions before
you use this power tool, keep the safety booklet
and preserve it well for later reference.
1. Always keep your workplace clean and tidy.
An untidy workplace can lead to unwanted
accidents.
2. Consider environmental influences.
Do not expose the power tool to rain.
Do not use the power tool in a damp or wet
environment.
Make sure that your working space has
sufficient lighting.
Do not use the power tool in areas where
there is a fire or explosive hazard.
3. To protect yourself from an electric shock.
Avoid body contact with grounded parts
(e.g. pipes, radiators, electric stoves,
refrigerators etc.).
4. Keep other people away
Keep other people away especially
children, do not let them touch your power
tool or cable and keep the children away
from your working area.
5. Store the unused power tools safely.
Unused power tools should be locked up or
stored in a place that is dry and out of reach
of children.
6. Do not overload your power tool.
You work better and safer in the specified
power range.
7. Use the correct power tool.
Do not use low-power machines for heavy
work
Do not use the power tool for purposes that
they are not intended for. For example you
cannot cut tree limbs or a log of wood using
a hand saw.
8. Wear suitable clothing.
Do not wear loose clothing or jewelry; they
can be caught in the moving parts.
When working outdoors non-skid footwear
is recommended.
For long hair, wear a hairnet.
9. Use protective equipment.
Wear protective goggles
When doing work that generates dust, use
a breathing mask.
10. Connect the vacuum device
If connection to the vacuum and catcher
are available then you know that these are
connected and properly used.
11. Do not use the cable for purposes that it is not
intended for.
Do not use the cable to the connector to
pull it out of the socket. Protect the cable
from heat, oil and sharp edges.
12. Secure the power tool.
Use clamps or a vice to hold the power tool.
It is safer than holding it with your hand.
13. Avoid an abnormal posture.
It ensures stability and keeps you balanced
at all times.
14. Keep and maintain tools with care.
Keep the cutting tools sharp and clean, this
ensures that you work better and that it is
as safe as possible.
Follow the lubricating and tool changing
instructions.
Check the connection cable of the power
tool regularly and let a qualified expert
repair any damages.
Check the extension cables regularly and
replace them if they are damaged.
Keep the handles clean, dry and free of
grease and oil.
15. Unplug the power tool from the power outlet.
When you are not using the power tool,
when you conduct maintenance and when
you change your tools such as blades, drills
and cutters.
16. Do not leave the key inside the tool.
Before switching it on, make sure that keys
and setup tools have been cleared
17.
Avoid unintentionally switching the power tool on.
Verify that while connecting the plug into
the socket that the power is off.
18. Use the extension cables while outdoors.
When using the power tool outdoors make
sure to use the appropriate and approved
labeled extension cable.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm TSM1033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TSM1033 in the language / languages: English, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 10,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferm TSM1033

Ferm TSM1033 User Manual - English, German, Dutch, French, Swedish, Spanish, Finnish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info