510127
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
EN
load and 6 minutes at no load.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN61029; it may be used
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
- using the tool for different applications, or with
different or poorly maintainted accessories,
may signicantly increase the exposure level.
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signicantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Product information
Fig. A
1. Protective cap
2. Fence
3. Bench inlay
4. Mitre handle
5. Height handle
6. Measurement set-up for fence
7. On/off switch
8. Workbench
Check rst whether or not the delivery has been
damaged by transport and/or whether all the parts
are present.
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the
following symbols are used:
Read the operating instructions carefully.
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
TABLE SAW
TSM1030
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2 - 5
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Technical specications
2. Safety instructions
3. Assembly instructions
4. Operation
5. Maintenance
1. TECHNICAL SPECIFICATIONS
Voltage 230 V~
Frequency 50 Hz
Power input 1500 W (S6-40%)
No load speed 5700/min
Max.cutting depth 90º 73 mm
Max.cutting depth 45º 60 mm
Saw blade dimensions 250 x 30 x 2.8
mm
Number of teeth T40
Measurements of bench 625 x 445 mm
Dust extraction outlet 30 (20) mm
Weight 23 kg
Lpa (sound pressure level) 93.4+3 dB(A)
Lwa (sound power level) 106.4+3 dB(A)
Vibration <2.5 m/s
2
S6 (40%) This indicates that the machine has an
S6 continuous operation periodic duty typ – in an
operating cycle of 10 minutes, 4 minutes at rated
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm TSM1030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TSM1030 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info