Manual Ferm TDM1021 - FTB-16NL (page 47 of 54) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632653

Zoom out

Zoom in

1/54

Ferm 47

La máquina está provista de un interruptor de desconexión. En caso de que la

corriente sea interrumpida por razones de seguridad, la máquina no empezará a

funcionar automáticamente, es decir, la máquina deberá ser activada de nuevo.

Recambio de cables y enchufes

Cuando cambie los cables y enchufes viejos por nuevos, deseche los viejos ya que es muy

peligroso conectar un enchufe cuyo cable está suelto.

Uso de cables de extensión

Utilice siempre cables de extensión autorizados que sean aptos para la potencia del aparato.

Los hilos deben tener un diámetro de 1,5 mm

. Cuando el cable de extensión esté en un

carrete, desenrolle el cable completamente.

3. MONTAJE

Montaje de la máquina

Al montar la máquina, emplee siempre el siguiente procedimiento en el orden proporcionado:

• Monte el soporte.

• Monte la mesa.

• Monte el cabezal.

• Monte el protector de seguridad.

• Monte el portabrocas.

• Elimine el aceite anticorrosivo de las piezas metálicas descubiertas con un paño y un poco

de aceite parafinado. Acontinuación, engrase las piezas con lubricante para máquinas.

Si faltaran piezas, no monte la máquina, no la enchufe y no la ponga en marcha

hasta que las piezas que faltan hayan sido montadas según las instrucciones.

Antes de su funcionamiento, compruebe:

• que la mesa pueda moverse suavemente;

• que el elevador de la taladradora suba y baje suave y regularmente;

• que la máquina no vibre cuando se pone en marcha.

Montaje del soporte

Fig. B1

Instale el pie (11) sobre una superficie sólida y nivelada.

• Coloque la columna (12) sobre el pie en la orientación que se indica.

• Monte la columna utilizando los pernos de sujeción (13).

Montaje de la mesa

Fig. B2 - B4

• Coloque la regleta dentada (14) contra la rueda dentada (15) en el interior de la

abrazadera de soporte (16) como se muestra.

• Deslice la abrazadera de soporte sobre la columna (12) mientras sujeta la regleta dentada

en su posición.

FIN

62 Ferm

TRAPANO ACOLONNADA BANCO CON LASER

Leggere attentamente il presente manuale prima di usare la macchina. Assicurarsi

di conoscere le funzioni della macchina e come attivarle. Maneggiare la macchina

rispettando le istruzioni per garantirne il funzionamento corretto. Conservare il

presente manuale e la documentazione allegata insieme alla macchina.

Descrizione

Il vostro trapano a colonna è stato progettato per realizzare fori su legno, metallo e plastica.

Contenuto

1. Informazione sul prodotto

2. Istruzioni di sicurezza

3. Montaggio

4. Utilizarra

5. Manutenzione

1. INFORMAZIONE SUL PRODOTTO

Specifiche tecniche

Descrizione

Fig. A

1. Interruttore on/off

2. Scomparto motore

3. Supporto

4. Cassetto per accessori

5. Piano

6. Mandrino

7. Protezione di sicurezza

8. Dispositivo di sollevamento del trapano

Tensione 230 V~

Frequenza 50 Hz

Potenza 500 W

Velocità in assenza di carico 425 - 2545/min

Numero di velocità 12

Cap. del mandril 16 mm

Raccordo conico MT2

Dimensioni banco 200 x 200 mm

Dimensioni banco (con prolunghe) 200 x 240 mm (max. 330 mm)

Altezza 850 mm

Peso 39.5kg

Lpa (pressione acustica) 64.9 dB(A)

Lwa (potenza acustica) 77.9 dB(A)

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TDM1021 - FTB-16NL in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm TDM1021 - FTB-16NL Manual

Product: