Manual Ferm TCM1007 - FRTC600 (page 6 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632938

Zoom out

Zoom in

1/40

Ferm 75

CE KONFORMITETSERKLÆRING (DK)

Vi erklærer herved, udelukkende på eget ansvar, at dette

FRTC-600

opfylder følgende standarder eller standardiserede dokumenter:

EN61029-1, prEN61029-2-7, EN12418, EN60825-1, EN55014-1, EN55014-2,

EN61000-3-2, EN61000-3-3

i overenstemmelse med direktivreglerne

98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC

Fra 01-01-2006

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

Ferm

Installing the stand

Fig.1

• Assemble the four legs to the table.

• Take care to tighten the bolts firmly, so that the machine stands securely.

• Place the water reservoir in the table, and secure it in place using the two clamps (13, Fig. 1).

• Place the machine in the water reservoir.

Connecting to the power supply

Check that the power supply and plug used in accordance with tour tool. Have a look at the

rating plate on the tile cutter. Any changes should always be carried out by a qualified

electrician.

We strongly recommend the use of an RCD (Residual Current Device) of not more

than 30 mA, at the plug socket when using this appliance.

Warning! This machine must be earthed.

If not properly earthed this machine can cause an electrical shock. Be sure that the power

supply outlet is earthed. If there is any doubt, have it checked by a qualified electrician.

Warning! Avoid contact with the terminals on the plug when installing (removing) the

plug to (from) the power supply outlet. Contact will cause a severe electrical shock.

Using an extension lead

The use of any extension lead will cause some loss of power. To keep this to a minimum and to

prevent overheating and motor burn-out, ask advice from a qualified electrician to determine

the minimum wire size of the extension lead.

The extension lead should be equipped with an earthed type plug that fits the power supply

outlet at one end, and with an earthed type socket that fits the plug of the machine at the other

end.

4. OPERATING THE TOOL

Read and understand the following items about your tile cutter before attempting to

use the machine.

Fig.1

• Adjust the required tool position, then tighten all the adjusting knobs, fence bolts and mitre

gauge bolts.

• Release the locked knob (12, Fig.1).

• Turn on the main switch and allow your tool to reach the maximum speed before

commencing cutting.

• Hold the workpiece firmly against the work table and fence, then feed machine smoothly

and evently to the workpiece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TCM1007 - FRTC600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm TCM1007 - FRTC600 Manual

Product: