Manual Ferm TCM1007 - FRTC600 (page 4 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632938

Zoom out

Zoom in

1/40

Ferm 77

Ferm

5. Guide rall

6. Fixing bolt / mitre gauge

7. Knob / mitre gauge

8. Mitre fence

9. Blade guard

10. Back Fence ( central end with 45° cutting)

11. Back Fence (double end planed)

12. Locking knob (for stop head moving)

13. Clamps for water reservoir

2. SAFETY INSTRUCTIONS

Explanation of the symbols

Read instructions carefully.

In accordance with essential applicable safety standards of European directives.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates electrical shock hazard.

Immediately unplug the plug from the mains electricity in the case that the cord gets

damaged and during maintenance.

Wear ear and eye protection.

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Specific safety instructions

• Wear protective glasses, dust mask, ear defenders, work gloves and protective-sliding shoes.

• Keep the table flat an d do not scratch or press the table.

• Do not put hands anywhere near the blade whilst it is rotating.

• Do not attempt to free a jammed blade without first switching off or removing the plug from

the mains power supply.

• Do not cut small workpiece and also do not use for a purpose not intended.

• Keep water full in the tank when you operate the cutter.

• Do noy use any solvents for instead water in this tool.

• Maintain th tool with care, keep blade sharp and clean, inspect plug, cord and water hose

periodically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TCM1007 - FRTC600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm TCM1007 - FRTC600 Manual

Product: