510124

Ferm SSM1005 Manual

8
Zoom out
Zoom in
Previous page
1/68
Next page
8 Ferm
EN
4. OPERATION
Always observe the safety instructions and obey the relevant regulations.
Start-PushthegreenON-switchtostartthemachine
Stop - Push the red OFF-switch to stop the machine
Tilting the table
Fig.D
The scroll saw table can be tilted through 45°. To do so:
• Lockthelockingarmunderneaththetable.
• Manuallytiltthetableuntilthedesiredanglehasbeenreached(seethegraduatedscaleonthe
machine).
• Retightenthelockingarm.
Adapters for universal saw blades
Fig. F
The enclosed adapters should only be used with universal (= without pins on the end) saw blades
• UnscrewtheAllenscrewsontheadaptercounterclockwise
• SlidetheuniversalsawintothegapbetweentheAllenscrews
• TightentheAllenscrewsclockwisesothesawisclamped
• Installthesawblade(seeINSTALLINGTHESAWBLADE)
Installing the saw blade
Fig.E
Always disconnect the machine from the main power supply before carrying out any
maintenance work
Use universal saw blades from any better DIY shop or machine shop.
• Selectthecorrectbladeforthekindofwoodtobecut.
• Pushthespannerupwards.(6).
• Pushthesawbladethroughtheslot,withtheteethpointingdownwards.Makesurethattheboltof
the saw blade (or saw-blade adapter) slides into the lower saw blade holder.
• Pullthesawbladeup,sothattheupperbolt(orsaw-bladeadapter)slidesintotheupperholder.
• Tightenthetensionerbuttonuntilthesawbladehastherequiredtension.
• Removealltoolsandotherobjectsfromthesawtable.Activatethecurrentandallowthesawblade
to run before starting to saw. The saw blade should run quietly.
Removing the saw blade
Always disconnect the machine from the mains before carrying out any maintenance work.
• Loosenthespanneruntilthespringisslack.
• Carefullypushdowntheuppersaw-bladeholderandslightlyliftthebladeinordertofacilitateits
removal.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm SSM1005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm SSM1005 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info