Manual Ferm SGM1025 (page 7 of 40) (English, German, Dutch, French)

812760

Zoom out

Zoom in

1/40

Additional safety instructions

• Never spray at persons - Never aim the

nozzle at another person or animal. Never

allow the spray to come into direct contact

with the skin.

• Flash point - This spray gun must not be used

for spraying flammable paints and solvents

with aflash point of less than 32 °C.

• Ventilation - Always make sure that there is

adequate ventilation in the work area when

spraying.

• Basket nozzle - Always keep the spray basket

nozzle in place during use.

• Consider work area environment – Do not

use spray guns where there is arisk of fire or

explosion.

• Beware of any hazard - Beware of any

Hazard by the material being sprayed and

consult the markings on the container or the

information supplied by the manufacturer.

• Do not spray - Do not spray any material

where the hazard is not known.

• Use eye protection - Always use appropriate

eye protection to keep hazardous vapours or

fumes out of the eyes.

• Wear amask - Never operate aspray gun

without wearing aface mask.

• Protect your ears - Wear ear protectors if the

sound pressure exceeds 85 dB(A).

• Maintain your tools - Keep your spray gun,

paint container and nozzles clean. Do not

clean with flammable liquids with aflash

point less than 32 °C Inspect the mains lead

periodically and if damaged have it replaced

by aqualified person.

• Naked flames - Never spray near anaked

flame or appliance pilot flame.

• Smoking - Never smoke whilst spraying.

• Thinning - Always read the paint

manufacturers thinning recommendations

or instructions before using paint or other

materials.

• Disconnect from the mains supply - Always

disconnect battery when filling the paint

container or cleaning the spray gun.

• Switch off when not spraying - Avoid running

the unit with the flow rate knob fully closed

for any length of time. Be aware of your

surroundings when spraying outside, wind

can cause un-intentional spraying of your

surroundings.

We accept no responsibility for damage

caused by the use of unsuitable

substances, or paints that have not been

thinned correctly, and any health hazards

that arise from lack of adequate

ventilation.

Immediately switch off the spray gun when:

• Defect switch.

• Smoke or stench of scorched isolation.

2. MACHINE INFORMATION

Intended use

The spray gun is intended for painting and

varnishing work in adomestic setting. The spray

gun is suitable for water, oil and solvent based

paint/varnish/stains, It is recommended to use

environmentally friendly paints and solvents.

Only use the spray gun for its intended purpose.

Do not use the machine to do other things outside

of the described scope in this manual. The

machine product is not intended for professional

or industrial use.

Be aware of the safety warnings and do not use

the later products, acid coating product, granula,

products, corrosive products, caustic products.

It is also not intended to use for spraying plant

protection products for the treatment of plants or

garden, as well as for spraying paint, ink or other

materials on human or animal body.

Technical specifications

Model No. SGM1025

Rated voltage 230V~ 50Hz

Rated output 450W

Maximum water flow rate 800 ml/min.

Max paint flow 230 ml/min.

Viscosity Max. 70 DIN/s

Container capacity 1200 ml

Nozzle diameter 1.5 mm, 1.8 mm, 2.2 mm,

2.5 mm

Weight 1.34 kg

Lpa (Sound pressure level) 80.1 dB(A) K=3dB(A)

Lwa (Sound power level) 91.1 dB(A) K=3dB(A)

Vibration 2.5m/s² K=1.5 m/s²

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm SGM1025 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm SGM1025 Manual

Product: