46 Ferm
ELECTRICAL SPRAY GUN
THE NUMBERS MENTIONED IN THE TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2 .
TECHNICAL SPECIFICATIONS
Check the machine, loose parts and accessories for
transport damage.
PRODUCT INFORMATION
Fig. A.
1 Motor housing
2. Output control
3. Trigger switch
4. Handle
5. Paint container
6. Spray basket nozzle
7. Flexible nozzle extension
8, Spare valve
9. Viscosity cup
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Warning! When using electric tools, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury. Read
all these instructions before attempting to operate
this product and save these instructions.
Always check that the mains voltage corresponds
to the voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
ADDITIONAL SAFETY INSTRUCTIONS
• NEVER SPRAY AT PERSONS - Never aim the nozzle
at another person or animal. Never allow the spray
to come into direct contact with the skin.
• FLASH POINT - This spray gun must not be used for
spraying flammable paints and solvents with a flash
point of less than 32 °C
• VENTILATION - Always make sure that there is
adequate ventilation in the work area when spraying.
• BASKET NOZZLE - Always keep the spray basket
nozzle in place during use.
• CONSIDER WORK AREA ENVIRONMENT - Do not
use spray guns where there is a risk of fire or explosion.
• BEWARE OF ANY HAZARD - Beware of any
Hazard by the material being sprayed and consult the
markings on the container or the information
supplied by the manufacturer.
• DO NOT SPRAY - Do not spray any material where
the hazard is not known.
• USE EYE PROTECTION - Always use appropriate
eye protection to keep hazardous vapours or fumes
out of the eyes.
• WEAR A MASK - Never operate a spray gun without
wearing a face mask.
• PROTECT YOUR EARS - Wear ear protectors if the
sound pressure exceeds 85 dB(A).
• MAINTAIN YOUR TOOLS - Keep your spray gun,
paint container and nozzles clean. Do not clean with
flammable liquids with a flash point less than 32 °C
Inspect the mains lead periodically and if damaged
have it replaced by a qualified person.
• NAKED FLAMES - Never spray near a naked flame
or appliance pilot flame.
• SMOKING - Never smoke whilst spraying.
• THINNING - Always read the paint manufacturers
thinning recommendations or instructions before
using paint or other materials.
• DISCONNECT FROM THE MAINS SUPPLY -
Always disconnect from the mains supply when filling
the paint container or cleaning the spray gun.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 75 W
Maximum nozzle flow rate | 275 g/min
Container capacity | 1000 ml
Nozzle diameter | 0.6 mm
Weight | 1.45 kg
Lpa (sound pressure capacity) | 85.2 dB(A)
Lwa (sound power level) | 98.2 dB(A)
Ferm 3
