Manual Ferm PRM1015 (page 7 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510113

Zoom out

Zoom in

1/132

Material Diameter

Router bit

Speed stages

Hardwood >20 mm 1 – 2

10 – 20 mm 3 – 4

<10 mm 5 – max

Softwood >20 mm 1 – 3

10 – 20 mm 3 – 6

<10 mm 5 – max

Aluminium >15 mm 1

<15 mm 1 – 2

Plastic >15 mm 1 – 2

<15 mm 2 – 3

After longer periods of working at low speed,

allow the machine to cool down by running it for a

few minutes at high speed with no load

Height setting of the router column

Fig. G+A1

The clamping lever (11) is used to set the

maximum height of the router.

Theplungedepthisthenxed.Thisisusually

necessary when using the tool on a special router

table.

Make sure the router column is not locked.

The router can be pushed down against the

spring force.

Lock the router column using the clamping lever

The router is now locked and will no longer return

to its original position.

Setting the plunge depth

Fig. G+A1

The plunge depth can be adjusted by using

buttons8,9,11and15.Iftheplungedepthisset

correctly, the groove in question can be routed

accurately to within 0.1 mm.

Preparation:

• Placethedesiredcutterinthetool.

The router can be pushed down against the

spring force.

• Pushthetooldownuntilthecuttertouchesthe

workpiece, then lock it using the clamping

lever (11).

• Loosenbutton9.

• Setbutton15tozero.

• Usebutton8tosetthedepthalltheway

down.

• Tightenbutton9(clockwise).Theplungedepth

is now set to precisely 0 mm.

Rough setting:

• Readthevaluefromthescale(12).

• Loosenbutton9.

• Turnbutton8andre-readthevaluefromthe

scale. The difference between the two values

istheplungedepthsetting.Forexample:Ifthe

value on the scale (12) is 8.5 in the zero-

setting and the value is 7.0 after button (8) has

been turned, then the plunge depth has been

set to 1.5 cm.

• Retightenbutton9.

Fine adjustment:

• Loosenbutton9.

• Thetopbutton(15)isstillsettozero.Givethis

button a full counter-clockwise turn, until it is

back in the zero position. The plunge depth is

now 1.0 mm less.

• Ifrequired,theplungedepthcanbeset

accurately to within 0.1 mm.

• Retightenbutton9.

Unlock the clamping lever (11)

Adjustment using the revolver- depth stop

The revolver-depth stop enables you to quickly

choose between three different cutting depths.

These are also determined by the adjustment of

the depth stop (10).

For larger routing depths, it is recommended to

carry out several repetitive cuts with lower

removal rates.

• Adjusttherequiredcuttingdepthbyrotating

the revolver-depth stop (21).

5. MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

These machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PRM1015 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm PRM1015 Manual

Product: