584956

Ferm PGM1007 - FGG-900 Manual

7
Zoom out
Zoom in
Previous page
1/56
Next page
Ferm 7
GB
Air filter cleaning
• Removetheairfiltercover(9).
• Removefilterelementandwashwellin
solvent.
• Pourasmallamountofoilontothefilter
element and gently squeeze out any excess
oil.
• Replacethefilterelementandairfilter
cover.
• Besurethefiltercoversealsproperlyall
around.
Do not run the engine without the air
filter element in place.
Never place a wet filter (with solvent)
on the machine.
Fuel tap
• Toremovethefueltapfilter,simplyundo
the cup at the bottom of the fuel tank.
• Useasmallspannertoremovethetap.
• Cleanandwashoutthefilterandcup,and
replace.
TROUBLESHOOTING
Basic checks
• Makesureyouhaveplentyoffuel
• Makesurethefueltapison
• Makesuretheengine-switchison
• Removesparkplug,connectsparkplug
lead and earth it to the generator. Pull
starter cord gently and look for a spark. If
there is no spark, replace spark plug.
Spark plug is OK, but engine still won’t start
• Checkfueltapfilterisclean
• Checkfuellineisclear
• Checkcarburetorisnotclogged
Engine will not start
• Cleanorreplacesparkplug
• Checkignitionsystem–iffaulty,contact
your service centre
• Checkcompression–iflow,contactyour
service centre
• Checkforloosecylinderhead–tighten
bolts
• Checkfordamagedcylinderheadgasket–
replace if necessary
CLEANING
Clean the housing regularly with a soft cloth,
preferably every time it is used. Keep the air
vents free of dust and dirt.
Remove stubborn dirt with a soft rag moistened
in soapy water. Do not use any solvents such
as petrol, alcohol, ammonia, etc. as such
substances can damage the plastic parts.
STORAGE (LONG TERM)
• Drainfueltank,fueltap,carburetorbowl
and carburetor
• Pour1cupofengineoilintothefueltank
and shake the generator to spread the oil
around the tank. Drain excess oil.
• Removesparkplugandpourin1spoonful
of engine oil, pull the starter cord several
times with the starter switch OFF. Replace
spark plug.
• Pullonthestartercorduntilyoufeel
compression and stop.
• Cleanthegeneratorsexteriorandcoatwith
rust inhibitor.
• Placethegeneratoronflatgroundand
cover with a clean dry cloth.
FAULTS
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you
find an exploded view showing the parts that
can be ordered.
ENVIRONMENT
To prevent damage during transport, the
appliance is delivered in a solid packaging
which consists largely of reusable material.
Therefore please make use of options for
recycling the packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
WARRANTY
Read the terms of warranty on the separate
warranty card which is enclosed.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm PGM1007 - FGG-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm PGM1007 - FGG-900 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info