Manual Ferm LTM1006 - FGT 500 (page 5 of 44) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632710

Zoom out

Zoom in

1/44

liquids or gases.

• Do not allow children into the area where you are working.

• Do not let children or other people touch power tools.

• Do not leave the power tool unattended.

• Store in a dry place well out of reach of children.

• Always use safety glasses. We also recommend the use of ear protectors.

• Wear non-slip shoes. Do not wear sandals or open-toed shoes.

• Before using any power tool, check first for damaged parts and if found do not use it

before the part or parts have been replaced with new ones.

• Do not use power tools when you are tired or have been drinking alcohol.

• Do not force the appliance - let it work at the rate for which it was intended.

• Do not overreach while working - you may lose your balance.

• You must switch off your tool at the tool’s on/off switch after use.

• Never use this appliance without the safety guard fitted. It must always remain fitted.

• We strongly recommend the use of an RCD (Residual Current Device) of not more

than 30 mA, at the plug socket when using this appliance.

• Only use spare parts and attachments supplied by Ferm. Use of attachments other

than those supplied or recommended by Ferm will invalidate your guarantee and

could be dangerous.

• Only use this appliance for its intended purpose - trimming grass and light bushes.

• Do not allow the power cord to lay on or across sharp objects that might pierce the

outer insulation. Carry out a visual inspection of the power cord before use and if it

is damaged, have it replaced by a specialist service centre. Do not use the appliance

if the cord is damaged.

Above all - be careful!

Specific Safety Warnings

Attention: Danger!

• The cutting elements continue to rotate after the motor is switch off.

• If the cord becomes damaged during use, disconnect the cord from the power supply

immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.

Do not use the appliance if the appliance cord or the extension cord are damaged.

• Keep extension cord away from cutting elements.

• Never fit metal cutting elements to this appliance.

• Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an

authorised repairer.

• Keep your hands and feet away from the cutting area at all times. Keep your second

(front) hand on the auxiliary handle.

• Always hold the trimmer at a safe distance from the body.

• Always wear protective goggles.

• Always use gloves.

• Only use the trimmer in daylight.

• Ensure the ventilation openings are clear of debris at all times.

Ferm 05

For optimal brug kan håndtaget drejes til venstre eller højre (venstre- eller højrehåndede

personer). Tryk på sidejusteringsknappen (4) og drej til venstre eller højre efter ønske. Når

sidejusteringsknappen slippes igen, klikker den på plads.

Advarsel! Sluk redskabet og tag stikket ud af stikkontakten, før fejlfinding.

Fejlfinding

Tabellen nedenfor nævner visse problemer, mulige årsager og afhjælpning, hvis trimmeren

ikke fungerer, som den skal. Hvis man ikke på denne måde kan finde/afhjælpe problemet,

kan man kontakte servicecentret.

Rengøring

Rengør regelmæssigt maskinkappen med en blød klud, helst efter hvert brug. Sørg for at

ventilationshullerne er fri for støv og snavs. Brug en blød klud, der er vædet i sæbevand

til at fjerne hårdnakket snavs. Brug ingen opløsningsmidler, så som benzin, alkohol,

ammoniak, osv. Den slags stoffer beskadiger kunststofdelene.

Smøring

Maskinen behøver ingen ekstra smøring.

Fejl

Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på

garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan

bestilles.

Miljø

For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er

så vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.

Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres

på en genbrugsplads.

Problem Mulig årsag Afhjælpning

Maskinen virker ikke Strømmen slået fra Tænd for strøm

Defekt stikkontakt Brug en anden stikkontakt

Forlængerledning beskadiget Efterse ledning og udskift, hvis beskadiget

Sikring defekt/sprunget Udskift sikring

Maskinen går rykvis Forlængerledning beskadiget Efterse ledning og udskift, hvis beskadiget

Indvendige ledninger beskadiget Kontakt servicecenter

Maskinen arbejder tungt Græs for langt Klip lidt ad gangen

Maskinen klipper ikke Tråd for kort/knækket Fremfør tråd manuelt/automatisk

Tråd kan ej fremføres automatiskIkke mere tråd på rulle

Udskift rulle Tråd i rullen sidder fast Efterse rullen og red tråd ud om

nødvendigt

84 Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm LTM1006 - FGT 500 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm LTM1006 - FGT 500 Manual

Product: