763901

Ferm LMM1012 Manual

11
Zoom out
Zoom in
Previous page
1/88
Next page
11
EN
Technical specifications
Model no. LMM1012
Voltage 230-240 V~
Frequency 50Hz
Power 1300 W
No load speed 3300/min
Cutting width 320 mm
Cutting height 25/40/55mm
Grass box capacity 30L
Weight 8.1 kg
Protection level IPX4
LPA (sound pressure) 85dB(A) K=3dB(A)
LWA (sound power) 96dB(A) K=3dB(A)
Vibration value <2.5m/s2 K=1,5ms2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN60335; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
- using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
page 2-5.
1. Upper handle
2. On/off switch
3. Safety button
4. Power socket
5. Cable strain relief
6. Cable holder
7. Carrying handle
8. Wheel
9. Wheel cover
10. Grass box basket
11. Grass box lid
12. Grass box cover
13. Grass level indicator
14. Lower handle
15. Knob for handle
3. ASSEMBLY
Before carrying out any work on the
machine, disconnect the mains plug
from the power supply
Assembling the lower handle
Fig. A, B, C
1. Insert the lower handle (14) into the intended
hole of the lawn mower body, as shown on
figure B. Ensure the hole in the lower handle (14)
aligns with the hole in the lawn mower body.
2. Insert the screw in the hole and tighten by
turning clockwise, as shown on figure C.
3. Repeat these steps for the other lower handle
(14).
Assembling the upper handle
Fig. A, D, E, F
1. Put the cable strain relief (5) on the right side of
the upper handle (1) as shown on figure D.
2. Attach the upper handle (1) to the lower handle
(14), using the supplied bolts and handle
knobs (15) as shown on figure E. Make sure
the on/off switch (2) assembly is on the right
side when standing behind the lawn mower.
3. Fixate the cable to the handle by using the
cable holders (6), as shown on figure F.
Note: When handle knobs (15) are loosened, the
upper handle (1) can be folded down for storing
the lawn mower. Ensure that the power cable is
not caught.
Mounting the wheels
Fig. A, G, H
1. Attach a wheel (8) on the axle. Afterwards, put
a supplied metal washer onto the axle.
2. Insert the supplied metal split pin in the
opening of the axle. Afterwards, fold the metal
split pin around the axle, as shown on figure G.
3. Mount the wheel cover (9) onto the wheel (8).
Make sure the plastic pins on the wheel cover
(9) align with the holes of the wheel (8).
4. Repeat these steps for the other wheels.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm LMM1012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm LMM1012 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info