Manual Ferm LMM1012 (page 9 of 88) (English, German, Dutch, French, Italian, Polish, Spanish)

763901

Zoom out

Zoom in

1/88

• Frequently inspect the condition of the

cutting blade. Damaged blade must be

replaced immediately. Follow all the required

precautions when replacing the blade.

• Before use check the supply and extension

cord for signs of damage or ageing. If the cord

becomes damaged during use, disconnect the

cord from the supply immediately.

• DO NOT TOUCH THE CORD BEFORE.

DISCONNECTING THE SUPPLY.

• Not to connect a damaged cord to the

supply or touch a damaged cord before it is

disconnected from the supply. A damaged

cord can lead to contact with live parts.

• Do not use the mower if the cord is damaged

or worn.

• Read the instructions carefully. Be familiar with

the controls and proper use of the equipment.

• Keep extension cord away from cutting blades.

• Wear eye and ear protection. Wear dust

protection if the mowing action causes the

raising of dust or particles.

• Never allow children, infirm people or people

unfamiliar with these instructions to use this

mower.

• Avoid using the mower while people, especially

children and the infirm, or pets are nearby.

• Use the mower only in day light or good

artificial light.

• Never operate the mower with a damaged base.

• When starting up and when the machine is in

operation, keep the cutting section away from all

parts of the body, especially the hands and feet.

• Do not start the machine when it is not in the

operating position.

• Thoroughly inspect the mower for loose or

damaged parts before each use. Do not use

the unit until adjustments or repairs are made.

• Use only the manufacturer’s recommended

replacement parts and accessories.

• Always disconnect the mower from the mains

when leaving it unattended.

• Switch the motor off and pull out the plug when

the machine is not being used, being cleaned,

being moved from one place to another or

when the blade is being changed or adjusted.

• If there is an interruption to the power supply

or the extension cable is damaged, switch off

the machine immediately and remove the plug

from the power point.

•

Inspect and maintain the mower regularly.

Have

the mower repaired only by an authorised

repairer.

• If power cord is damaged, only have it repaired

or replaced by an authorised service centre.

• Check that all grass cuttings and dirt have

been removed from the ventilation vents.

• When not in use, store the mower out of the

reach of children and infirm people.

WARNING: In order to reduce the risk,

disconnect the plug from the supply

power, only use recommended

accessories as required, otherwise

personal injury may result.

• Do not switch on the machine in enclosed or

poorly ventilated spaces or in the presence

of inflammable and /or explosive substances

such as liquids, gasses and powders.

• Always stop the mower and switch off at the

mains when cutting is delayed, emptying the

grass box or when walking from one cutting

location to another.

• Do not cross roads or gravel paths with the

machine still running.

• Do not move the machine by pulling on the

electrical cable. Always use the handgrip.

• Keep a balanced and stable stance while using

the machine.

• Ensure that the area being cut is free from

strings, stones and debris. Remove any

objects that could be thrown during cutting

or could wind around the cutting mechanism.

Carefully check the area to be mown for

wildlife such as hedge hogs, frogs etc. And

move them to a safe location

• If you hit or become entangled with a foreign

object, stop the motor and disconnect from

the

mains immediately to check for damage.

Repair

any damage before further operation is

attempted.

• Do not operate the mower with loose or

damaged parts.

• Do not cut against hard objects. This could

cause injury to the operator and damage to the

machine.

• Keep your hands, face and feet away from all

moving parts.

• If possible, avoid cutting wet grass.

•

Exercise proper caution when mowing on sloping

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm LMM1012 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm LMM1012 Manual

Product: