Manual Ferm LMM1011 (page 6 of 32) (English)

763665

Zoom out

Zoom in

1/32

Have

the mower repaired only by an

authorised repairer.

• If power cord is damaged, only have it repaired

or replaced by an authorised service centre.

• Check that all grass cuttings and dirt have

been removed from the ventilation vents.

• When not in use, store the mower out of the

reach of children and infirm people.

WARNING: In order to reduce the risk,

disconnect the plug from the supply

power, only use recommended

accessories as required, otherwise

personal injury may result.

• Do not switch on the machine in enclosed or

poorly ventilated spaces or in the presence

of inflammable and /or explosive substances

such as liquids, gasses and powders.

• Always stop the mower and switch off at the

mains when cutting is delayed, emptying the

grass box or when walking from one cutting

location to another.

• Do not cross roads or gravel paths with the

machine still running.

• Do not move the machine by pulling on the

electrical cable. Always use the handgrip.

• Keep a balanced and stable stance while using

the machine.

• Ensure that the area being cut is free from

strings, stones and debris. Remove any

objects that could be thrown during cutting

or could wind around the cutting mechanism.

Carefully check the area to be mown for

wildlife such as hedge hogs, frogs etc. And

move them to a safe location

• If you hit or become entangled with a foreign

object, stop the motor and disconnect from

the

mains immediately to check for damage.

Repair

any damage before further operation is

attempted.

• Do not operate the mower with loose or

damaged parts.

• Do not cut against hard objects. This could

cause injury to the operator and damage to the

machine.

• Keep your hands, face and feet away from all

moving parts.

• If possible, avoid cutting wet grass.

•

Exercise proper caution when mowing on sloping

ground. Watch your footing and wear non-slip

footwear. Mow along the slope not up and down

it. Do not mow on steep slopes. Be especially

cautious when changing direction on slopes

stand above the mower to avoid risk of injury.

• Never operate the mower barefoot or when

wearing open sandals or canvas shoes.

•

Do not mow by pulling the machine towards you.

• When mowing, keep the cable away from the

mower. Your direction of work should be away

from the power point. Mow in straight lines,

not in circles.

• Always keep hands and feet away from rotating

parts.

• Check the grass box frequently for wear or

deterioration.

• After use, disconnect the machine from the

power supply and check for damage. If you

have the slightest doubts, check with an

authorised service centre.

• Only use the machine according to the

instructions given in this manual.

• Check regularly that the nuts, bolts, screws

and other fittings are tight and secure. Keep

the mower free of grass, leaves and other

debris build-up.

• Do not tilt the mower when switching on the

motor, except if the mower has to be tilted for

starting. In this case, do not tilt it more than

is absolutely necessary and lift only the part

which is away from the operator. Always ensure

that both hands are in operating position

before returning the mower to the ground.

• Do not try to repair the machine or access

internal parts. Use authorised service centres

only.

• Do not get distracted and always concentrate

on what you are doing

• Use common sense. Never operate the

machine when you are tired, sick or under the

influence of alcohol or other drugs.

• Keep these instructions. Refer to them

frequently and use them to instruct other

users. If you loan someone this unit, also loan

them these instructions.

• The operator or user is responsible for

accidents or hazards occurring to other people

or their property.

• Failure to follow operating instructions and

safety precautions in this instruction manual

can result in serious injury. Read the manual

before starting or operating this unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm LMM1011 in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm LMM1011 Manual

Product: