632706

Ferm LBM1008 - FLB 2500 Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
Class II machine – Double insulation –
You don’t need any earthed plug.
Replacing cables or plugs
Immediately throw away old cables or plugs
when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in
the wall outlet. If you have to rewire at any time
please connect as follows.
Attach the blue cable
(Neutral) to the terminal marked N or coloured
black or blue. Attach the brown cable (Live) to
the terminal marked L or coloured red or brown.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine.
The minimum
conductor size is 1.5 mm
2
. When using a cable
reel always unwind the reel completely.
3. ASSEMBLY
Assembly vacuum tube
Fig. 1
1. Pull the tube out of the housing until the
marking.
2.
Allign the holes
3. Fix the tube onto the housing using enclosed
the screws.
4. Cover the screws using the enclosed
screwcovers.
5. The screws can be removed for easier
storage.
Attach the collection bag
Fig. 3
Always use the collection bag when
using vacuum mode.
Attach the hook to the upperpart of the housing.
Slide the open end of the collection bag over the
tube and connect it to the housing. Attach the hook
to the lower part of the housing.
Always check the vacuum bag for signs
of damage before each use. Small,
sharp objects can be sucked up and if
the bag is damaged or worn the objects
might be thrown in your direction or the
direction of others. This could lead to
serious injury so please check. If your
bag is damaged or badly worn please
replace it with a new one.
4. OPERATION
Operation
Fig.2
Plug in your appliance at the mains (or extension
lead) and when you are ready and well balanced,
press the ON/OFF button (5) and it will start.
Press again to turn it of
f.
Note: We recommend the use of a heavy-duty
outdoor extension cable.
Alter the harness length so that you can stand up
straight and allow the blower to rest on its wheels
when in use.
This will lighten the load across
your shoulders and back. Use in a forward and
backward direction, not side to side.
Changing operation mode (blow/vac)
Fig.2
When you want to change from one mode to
another
, simply pull the option level to suit your
requirement. Turn it clockwise to blower mode
and anti-clockwise to vacuum mode (remember
to fit the bag if you want vacuum mode).
Speed dial
Fig.1
Your blower/vac has a variable speed dial (6)
which can be used as conditions dictate.
5. SERVICE & MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
GB
Ferm
05
DK
44
Ferm
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm LBM1008 - FLB 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm LBM1008 - FLB 2500 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info