763898
7
Zoom out
Zoom in
Previous page
1/44
Next page
7
EN
Technical specifications
Model No. JSM1034
Voltage 230-240V~
Frequency 50Hz
No load speed 0-3000/min
Max. saw capacity wood 0° 65mm
Max. saw capacity steel 0° 6mm
Weight 1.85 kg
Sound pressure level LPA 95 dB(A), K=3dB(A)
Sound power level LWA 96 dB(A), K=3dB(A)
Vibration ‘sawing sheet metal’ 10.08 m/s2 K=1.5 m/s2
Vibration ‘sawing plywood’ 9.19 m/s2 K=1.5 m/s2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned:
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
page 2 and 3.
1. On/off switch
2. Dust blower switch
3. Main handle
4. Auxiliary handle
5. Speed adjustment wheel
6. Pendulum action switch
7. Scale for bevel angle
8. Vacuum cleaner adapter
9. Baseplate
10. Guide roller
11. Clamping lever
12. Bolts for parallel guide
13. Hex key
14. Chuck
15. Saw blade
16. Bolt for baseplate
17. Parallel guide
18. Cutting mark
3. ASSEMBLY
Replacing the saw blade
Fig. A, B
When mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade.
Only use saw blades that correspond
with the characteristic data given in the
operating instructions.
Mounting the saw blade
Make sure the blade holder is free of material
debris (such as splinters of wood or metal).
1. Turn the clamping lever (11) as far to the left as
possible and hold it in this position.
2. Insert the saw blade in the chuck (14). Check
that the saw blade is securely fixed and that
the teeth are pointing in the cutting direction.
3. Let go of the clamping lever. Check whether
the back of the saw blade is positioned in the
centre of the guide roller (10). Make sure to
use the right sawblade for the corresponding
material. Included with the machine is a coarse
sawblade for wood and a fine sawblade for
metal and plastics.
Removing the saw blade
1. Turn the clamping lever (11) as far to the left as
possible and hold it in this position.
2. Remove the saw blade from the chuck (14).
3. Let go of the clamping lever.
Attaching the parallel guide
Fig. C
1. Loosen the bolts (12).
2. Mount the parallel guide (17) onto the
baseplate (9).
3. Set the desired cutting width using the scale
on the parallel guide (17) and the cutting mark
on the baseplate (9). The cutting mark (18)
indicates the position of the saw blade.
4. Tighten the bolts (12).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm JSM1034 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm JSM1034 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info