Manual Ferm JSM1033 (page 9 of 72) (English, German, Dutch, French, Italian, Polish, Spanish)

763897

Zoom out

Zoom in

1/72

Dust extraction

Fig. E

• Insert the dust extraction adapter (8) into the

dust extraction connection (22).

• Connect the hose of a vacuum cleaner to the

dust extraction adapter (8).

Plunge cutting

Fig. G

Plunge cutting may only be used on soft materials

such as wood, aerated concrete, gypsum plaster

boards, etc. However, this requires a certain

practice and is only possible with short saw

blades.

1. Place the saw onto the workpiece and switch it

on.

2. Ensure that the bottom edge of the footplate

rests on the workpiece surface as shown on

Fig. G.

3. Slowly saw into the workpiece at an angle,

moving the saw to a vertical position and

continue to saw along the cutting line.

4. Switch the saw off and lift off the workpiece

when the work is complete.

Optimum use

• Clamp the workpiece. Use a clamping device

for small workpieces.

• Draw a line to define the direction in which to

guide the saw blade.

• Firmly hold the machine by the grip.

• Set the sawing speed.

• Set the mitre angle.

• Switch on the machine.

• Wait until the machine has reached full speed.

• Place the saw shoe on the workpiece.

• Slowly move the machine along the pre-drawn

line, firmly pressing the saw shoe against the

workpiece.

• Do not apply too much pressure on the

machine. Let the machine do the work.

• Switch off the machine and wait for the

machine to come to a complete standstill

before putting the machine down.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be

collected at the appropriate recycling

locations.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EC for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

WARRANTY

FERM products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact your FERM

dealer directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers.

• Normal wear and tear.

• The tool has been abused, misused or

improperly maintained.

• Non-original spare parts have been used

This constitutes the sole warranty made by

company either expressed or implied. There are

no other warranties expressed or implied which

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm JSM1033 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm JSM1033 Manual

Product: