Manual Ferm HTM1008 (page 11 of 44) (English, German, Dutch, French)

800223

Zoom out

Zoom in

1/44

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping your

hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-5.

1. Hedge trimmer head

2. Head adjustment button

3. Head locking ring

4. Hedge trimmer blade

5. Handle locking lever

6. Power switch

7. Telescopic handle

8. Power connector

9. Shoulder strap

10. Carabiner

11. Protection sleeve

12. Battery

13. Battery charger

14. Battery release button

15. Battery LED indicators button

16. Battery LED indicators

17. Charger LED indicators

3. ASSEMBLY

Before any work on the power tool,

remove the battery.

The battery must be charged before first

use.

Tool assembly (Fig. C, D)

• Attach the shoulder strap (9) to the loop on the

handle (7) using the carabiner (10).

• Release the head locking ring (3) by rotating it

anti-clockwise. Do not completely remove the

ring from the head.

• Fit the hedge trimmer head (1) to the

telescopic handle (7) by inserting the power

connector (8) into the head.

• If the connector (8) is not inserted properly,

there might be no electrical connection and the

tool will not work. Make sure that the power

connector is fully inserted into the hedge

trimmer head. The screw (18) on the handle

should be covered by the trimmer head (1) and

locking ring (3).

• Secure the hedge trimmer head (1) by rotating

the locking ring (3) clockwise

Never fasten the belt diagonally across the

shoulder and chest, but place it on one of

the shoulders. This way you can quickly

remove the tool from your body in case of

danger.

Adjusting the telescopic height (Fig. E-1, E-2)

• Unlock the lever (5) to release the telescopic

handle (7).

• Extend or retract the telescopic handle (7) to

the desired length.

• Secure the telescopic handle by locking the

lever (5).

Adjusting the pivoting hedge trimmer head

(Fig. F-1, F-2)

• Press both the button (2) on the side of the

hedge trimmer head (1).

• Adjust the head to the desired position.

• Release the button (2) and make sure the head

is locked in place.

Inserting the battery into the machine (Fig. A,

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (2) into the base of the

machine as shown in Fig. D.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig.

A, D)

1. Push the battery unlock button (3)

2. Pull the battery out of the machine like shown

in Fig. D.

4. OPERATION

Before using, always visually inspect to

see that the blades, blade bolts and

cutter assembly are not worn or

damaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HTM1008 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HTM1008 Manual

Product: