54 Ferm
SPARE PARTS LIST FHT-600M
FERM NR DESCRIPTION REF NR
501309 SWITCH 18
501310 BRUSH HOLDER 56, 57
501311 BRUSH (SET OF 2) 58
501312 COVER SAFETY SWITCH 11
501313 HAND PROTECTION COVER 12
501314 UPPER BLADES 65
501315 LOWER BLADES 66
SAFETY AND OPERATING
INSTRUCTIONS FHT-600M
For your own safety and for the safety of others, please
read these instructions carefully before using this
appliance. Keep in a safe place for future reference.
Warning! Always read the instruction for
electrical products carefully before use. It will help
you understand your product more easily and avoid
unnecessary risks.
Keep this instruction manual in a safe place for future
use.
TECHNICAL SPECIFICATION
EXPLANATION OF SYMBOLS
In accordance with essential applicable safety
standards of European directives.
Class II machine – Double insulation – You don’t
need any earthed plug.
Risk of damaging material and/or physical injuries.
Risk of an electric shock.
Read the instructions.
Do not expose to rain
Remove plug from the mains immediately if cable
is damaged or cut
Keep bystanders away.
CONTENTS OF PACKING
1 Main Body
1 Safety Guard
4 Screws
1 Blade cover
1 Instruction manual
1 Safety instructions
1 Warranty card
FEATURES
Fig.1
1. Power Cable
2. ON/OFF trigger
3. Power Cord Hanger
4. Cutting Blade
5. Safety Guard
6. Safety Switch
7. Transport protection
8. Cover Fastening Lock
SAFETY INSTRUCTIONS
• Dispose of plastic bags safely - they are a suffocation
hazard for young children.
• Keep the area you are working in clean and tidy.
• If you are using a means of support to raise yourself
off the ground, ensure that it is stable and cannot
topple over - do not overreach at any time.
• Do not use power tools in the rain or wet
environments.
• Do not use power tools where there is a risk of fire
or explosion - i.e. near flammable liquids or gases.
• Do not allow children into the area where you are
working.
• Do not let children or other people touch power tools.
• Do not leave the power tool unattended.
• Store in a dry place well out of reach of children.
• Always use safety glasses and gloves. We also
recommend the use of ear protectors.
• Wear the right clothes - not loose fitting or jewellery
and ensure garments cannot come into contact with
moving parts.
• If you have long hair, tie it back safely to avoid tangling
it in moving parts.
• Before using any power tool, check first for damaged
parts and if found do not use it before the part or
parts have been replaced with new ones.
• Do not use power tools when you are tired or have
been drinking alcohol.
• Do not force the appliance - let it work at the rate for
which it was intended.
• Do not overreach while working - you may lose your
balance.
• Never use this appliance without the blade guard
fitted. It must always remain fitted.
• Only use spare parts and attachments supplied by
Ferm. Use of attachments other than those supplied
or recommended by Ferm will invalidate your
guarantee and could be dangerous.
• Only use this appliance for its intended purpose -
trimming hedges and bushes.
• We strongly recommend the use of an RCD
(Residual Current Device) of not more than 30 mA,
at the plug socket when using this appliance.
Model | FHT-600M
Voltage | AC 230 V
Input power | 580 W
No load running speed | 1600 rpm
Length of blade | 600 mm
Tool class | II
Maximum cutting thickness | 20 mm
Weight | 4.1 kg
Sound pressure level | 89 dB(A)
Sound power level | 102 dB(A)
Outdoor noise | 102 dB(A)
Vibration | 4 m/s
2
Ferm 3
