Manual Ferm HDM1013 - FBH-1100KD (page 5 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763709

Zoom out

Zoom in

1/48

Ferm 05

1 Depth gauge

1 Drill chuck with chuck key

1 Can of lubricating grease

1 Dust catcher

3 Hammer drill bits

2 Chisels

1 Pair of carbon brushes

1 Set of operating instructions

1 Guarantee card

Details

Fig. A + D

1. ON/OFF switch

2. Handle selection switch drilling - hammering

3. Front selection switch demolition - hammer drilling

4. Bumper

5. Carbon brush cap

6. Grease cap

7. Auxiliary handgrip

8. Depth gauge

9. SDS 10 chuck

10. Dust catcher

2. SAFETY REGULATIONS

Explanation of the symbols

The following symbols are used in these instructions and on the device:

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates electrical shock hazard.

Wear ear and eye protection

Device Class II – double insulation – No grounded connector plug is required.

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Special safety instructions for hammer drills

a. Attention! The use of accessories or additional devices other than those recommended in the

operating instructions, or those included in the scope of delivery, can pose an injury hazard.

FIN

92 Ferm

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1013 - FBH-1100KD in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HDM1013 - FBH-1100KD Manual

Product: