763922
7
Zoom out
Zoom in
Previous page
1/40
Next page
Ferm 07
•To release and remove the drill bit pull back the collar of drill chuck .
Adjusting depth stop
Loosen the manual side grip.
Place the straight part of the depth stop through the hole in the grip.
Adjust the stop to the desired bit depth.
Tighten the grip firmly.
Installing dust catcher
Fig.C
The dust catcher prevents large amounts of drilling dust entering the machine when drilling
into ceilings.
Remove the drill bit.
Slide the dust catcher over the shaft of the drill bit.
Place the drill bit with catcher in the drill chuck.
Always replace a damaged dust catcher immediately.
Mode selector switch
Fig.D
The correct switch lever positions required for each drilling mode are indicated in the diagram
at page 2.
D1 =Hammerdrilling .
D2 = Drilling.
D3 = Chiseling.
Switching On/OffOFF
To start drill: depress On/Off switch.
To stop drill: release On/Off switch.
Drill with drill chuck adapter
Fig.E
When drilling steel, wood and plastic, it is advisable to use the ring gear chuck and the drill
chuck adapter.
4. MAINTENANCE
Take care that the machine is not connected to power whenever maintenance
work on the mechanical parts is taking place.
Ferm machines are designed to function problem-free for a long period with a minimum of
maintenance. Through regular cleaning and correct treatment, you help assure a long working
life for your machine.
UK
74 Ferm
•Viser boret tegn på unormal funktion, overophedning eller for megen gnistdannelse?
Stands straks maskinen, hvis ét af de ovennævnte problemer opstår og få den
repareret af en faguddannet tekniker.
Elektrisk sikkerhed
Kontroller altid, at netspændingen er den samme som på maskinens typeskilt.
Maskinen er dobbeltisoleret i henhold til EN50144; derfor er jordledning ikke
nødvendig.
Udskiftning af netledninger eller stik
Kasser straks gamle ledninger og stik, der er blevet udskiftet. Det er farligt at slutte en løs
netledning til et stik til elnettet.
Brug af forlængerledninger
Brug altid kun forlængerledninger, der er egnede til maskinens nominelle effekt. Min.
åretykkelse er 1,5 mm2. Rul altid ledningen helt ud, når du bruger en forlængerledning på spole.
3. BETJENING
Når maskinen bruges som borehammer, skal der kun anvendes let tryk.
Overdrevent tryk kan forårsage, at motoren overophedes unødvendigt.
Sidehåndtag
Sidehåndtaget kan drejes til hver side, så sikker og komfortabel drift er mulig for både højre-
og venstrehåndede personer.
Løsn håndtaget ved at dreje det mod uret.
•Drej håndtaget til den ønskede placering.
Stram håndtaget godt.
Udskiftning af bor
Fig.B
Kontroller, at stikket er taget ud af stikkontakten, før bor udskiftes.
Kontroller jævnligt borene. Døve bor skal slibes eller udskiftes.
Smør borets skaft lidt, før det indsættes i maskinen.
•Placer borets skaft i åbningen på borepatronen og drej, indtil den låser.
•Træk kappen på borepatronen tilbage for at løsne og fjerne boret.
DK
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm HDM1005 - FBH-850K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1005 - FBH-850K in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info