632717
6
Zoom out
Zoom in
Previous page
1/44
Next page
Ferm 83
check for løstsiddende dele og fastgør om nødvendigt
beskadigede dele skal repareres eller udskiftes med dele med samme specifikationer
Fintskåret materiale fra maskinen må ikke hobe sig op i udkastområdet; dette kan være til
hinder for korrekt udkast og resultere i, at materiale kastes tilbage gennem
indkaståbningen.
Hvis maskinen blokeres, skal strømmen afbrydes, (stikket tages ud af stikkontakten) før
rester pilles ud. Sørg for, at restmateriale ikke kommer i nærheden af strømkilden, så
strømkilden ikke beskadiges, og der ikke sker antændelse. Hvis startmekanismen på
motordrevne maskiner betjenes, begynder skæreknivene at rotere.
Sørg for, at alle afskærmninger og deflektorer er på plads og fungerer korrekt.
Begynd ikke at pille ved strømkildens indstillinger; regulatoren styrer den sikre maksimale
driftshastighed og beskytter strømkilden og alle bevægelige dele mod beskadigelse og
overhastighed. Hvis der opstår problemer, skal man henvende sig til et autoriseret
værksted.
Maskinen må ikke transporteres, hvis strømkilden er slået til.
Sluk for strømkilden og tag stikket ud af stikkontakten, når arbejdsområdet forlades.
Maskinen må ikke løftes, hvis strømkilden er slået til.
Kompostkværnen skal sættes på en plan og vandret overflade.
Maskinen må ikke lægges ned på bagsiden, forsiden eller en af siderne – den skal altid stå
opret.
Kværnen må ikke overbelastes – kom materiale i lidt efter lidt og lad maskinen arbejde i
passende tempo.
Før maskinen startes, skal man checke, at der ikke er noget i indkaståbningen.
Kompostkværnen må ikke startes, hvis der er materiale i den.
Medmindre der er tale om et nødstilfælde, må kompostkværnen kun stoppes, når den er
helt tømt for materiale.
Fjern sten og andre hårde genstande fra planterødder, før de kommes i kompostkværnen.
Tykke kviste og små grene skal holdes godt fast, når de stikkes i kompostkværnen.
Udkastet må ikke på noget tidspunkt blokeres eller afdækkes (se ’Blokeringer’).
Tænd/sluk
Fig. 3
Tryk på knappen (I) for at starte maskinen (3).
Rotationshastigheden vil øges i opstarten. Det tager et par sekunder.
Mens affaldet bliver komposteret, tilpasser rotationshastigheden sig til mængden.
Tryk på knappen (I) for at stoppe maskinen.
Overbelastningssikring
Under Tænd/Sluk-knappen er der en strømafbryder (8). Hvis der opstår overbelastning
(blokering), vil maskinen stoppe automatisk.
Fjern stikket fra hovedkontakten og fjern materialet, som sidder fast.
Maskinen tilbagejusteres ved at trykke på knappen til strømafbryderen.
DK
06 Ferm
Wear ear and eye protection
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Specific safety instructions
If you are in any doubt what so ever about using this appliance, we strongly recommend that
you employ the services of a suitably qualified person.
Keep children and pets well away from the work area and never allow children to use this
appliance or touch the main power cord or extension cord at any time. When not in use,
keep this appliance stored in a safe place out of reach of children.
Wear ear protection and safety glasses at all times while operating the machine
Only operate the machine in open space (e.g. not close to a wall or other fixed object) and
on a firm, level surface.
Do not operate the machine on a paved or gravel surface where ejected material could
cause injury.
Before starting the machine, check that all screws, nuts, bolts, and other fasteners are
properly secured and that guards and screens are in place. Replace damaged or
unreadable labels.
Only use a waterproof, fully unwound extension cable suitable for outdoor use.
This appliance is for outdoor use only
Do not expose this appliance to rain.
Keep the work area well lit.
Never leave the appliance unattended.
Do not use the appliance in an area where it could cause an explosion or fire - keep it away
from flammable liquids and gases.
Dress sensibly for the job in hand - no loose clothing that could get caught in the moving
parts of the appliance.
Always wear safety goggles and a dust mask when using this appliance.
Always wear heavy-duty outdoor gloves when using the appliance.
Pull long hair back out of the way and wear a protective hat.
Guard against electric shock - prevent body contact with earthed or grounded surfaces i.e.
metal gates, posts or other metal objects in the work area.
Never pull the appliance by its power cord. Wheel it or carry it with two hands.
Do not allow the power cord to lay on or across sharp objects that might pierce the outer
insulation. Carry out a visual inspection of the power cord before use and if it is damaged,
have it replaced by a specialist service centre. Do not use the appliance if the cord is
damaged.
Keep the power cord away from heat, frost, oil, solvents or any sharp objects or edges.
Do not use this appliance if you are on strong medication, unwell or have been drinking
alcohol.
GB
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm GSM1003 - FGS 1800N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm GSM1003 - FGS 1800N in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info