632717
5
Zoom out
Zoom in
Previous page
1/44
Next page
Ferm 05
1 Wrench
1 Push stick
1 Axle
2 Wheels
2 Wheel caps
1 Allen key
1 Operating instruction
1 Safety instruction
1 Warranty card
Check the machine, loose parts and accessories for transport damage.
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this operator's guide the following symbols are used:
Read instructions carefully
In accordance with essential applicable safety standards of European directives
Class II machine – Double insulation – You don’t need any earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord gets
damaged and during maintenance
Danger - Rotating blades. Keep hands and feet out of openings while machine is
running. The blades will continue to rotate after the machine has been switched off.
Beware of objects being flung out.
Keep bystanders away
Do not use in rain
Sound power level
GB
84 Ferm
Blokeringer
Fig. 3
Hvis kompostkværnen blokeres, skal der slukkes for maskinen, og stikket skal
tages ud af stikkontakten.
Drej knappen (2) på tragten mod uret, indtil tragten er løsnet. Når den løftes op og af, kan man
komme til det indvendige af kværnen. Fjern blokeringer (pas på ikke at komme til at berøre de
skarpe knive), sæt tragten på igen og stram knappen til ved at dreje den med uret.
Udskiftning af knive
Fig. 4a + 4b
Hvis knivene skal skiftes ud, skal maskinen slukkes, og stikket skal tages ud af stikkontakten
Drej knappen til beskyttelseshætten mod uret indtil hætten er løs.
Under hætten er der et beskyttelsesdæksel med 8 skruer.
Fjern beskyttelsesdækslet med en skruetrækker.
Fastgør skruen i midten med den skruenøgle, der følger med.
Nu kan knivene fjernes med en umbrakonøgle.
Knivene har to skær, så de kan bare vendes, så man også bruger skæret på den anden side.
Hvis kniven allerede er blevet vendt en gang, skal der sættes en ny i. Henvend Dem til den
lokale forhandler for nye knive.
5. VEDLIGEHOLDELSE
Sørg for, at maskinen ikke er sluttet til strømmen, når der udføres vedligeholdelse
på de mekaniske dele.
Vedligeholdelse
Denne kompostkværn skal kunne bruges i lang tid uden problemer og kræver kun begrænset
vedligeholdelse. Maskinens levetid kan forlænges, hvis den rengøres jævnligt og bruges på
den rette måde.
Hvis maskinen stoppes, fordi den skal efterses, gemmes væk eller fordi der skal skiftes et
tilbehør, skal strømmen slås fra (strømforsyningen afbrydes), og man skal sikre, at
bevægelige dele er stoppet, og en eventuel nøgle skal tages ud. Lad maskinen køle af, før
der udføres eftersyn, justeringer osv.
Når der udføres vedligeholdelse på skærende dele, skal man være opmærksom på, at de
stadig kan bevæge sig, selvom beskyttelsesanordningen blokerer for start.
Rengøring
Huset skal regelmæssigt rengøres med en blød klud, og helst hver gang den har været brugt.
Ventilationsrillerne skal holdes fri for støv og snavs. Fastsiddende snavs fjernes med en blød
klud, vredet op i sæbevand. Der må ikke bruges opløsningsmidler som benzin, sprit,
ammoniak o.l., fordi de kan beskadige dele af plastic.
DK
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm GSM1003 - FGS 1800N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm GSM1003 - FGS 1800N in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info