Manual Ferm fpd 13 500 (page 5 of 22) (English, German, Dutch, French, Italian)

386213

Zoom out

Zoom in

1/22

Ferm 05

• Always compare the maximum rotation speed

of accesoires with the maximum speed of the

percussion drill.

• Pull the mainsplug from the socket before you

change a drill or accessory.

When operating the machine

• Check if the switch is placed in the ‘OFF’-

position before you connect the machine to

mains.

• Keep the mains cable away from moving

parts of the machine.

• First switch off the machine before you move

the machine downwards along your body.

• Never cover the ventilation slots.

Immediately switch off the machine in case of:

• Excessive sparking of the brushes and

verticiliosis in the collector.

• Malfunction of the mainsplug, -socket or

damaged cables.

• Broken switch.

• Smoke or smell caused by scorched

insulation.

Electrical safety

When using electric machines always observe

the safety regulations applicable in your country

to reduce the risk of fire, electric shock and

personal injury. Read the following safety

instructions and also the enclosed safety

instructions. Keep these instructions in a safe

place!

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class II machine - Double insulation -

You don’t need any earthed plug.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. ASSEMBLY

Use only sharp drills of the following types

Fig.B

Concrete/masonry

Hard metal

Metal

HSS

Wood

HSS

Mounting accessories

Fig.C

Prior to mounting an accessory always

unplug the tool.

Placing and removing bits

In addition to bits the machine can also hold

screw bits with a hexagonal shaft:

• Open and close the chuck with the chuck key.

• By placing the chuck key in one of the three

holes in the chuck, the chuck can be opened

by turning the chuck key counter clockwise

and closed by turning the chuck key

clockwise. Because the chuck has three

clamps the drill will be centered automatically.

• Always place the chuck key on top of the

machine in the holder.

• Check if the switch (7) is in the OFF-position

and if the left/right switch (6) is in the RIGHT-

position.

• Connect the machine to the mains.

4. USE

The On/Off switch

Fig.D

• Switch the machine on by pressing the

triggerswitch (A). When you release the

triggerswitch (A) the machine will turn off.

Switch-lock

• You can lock the On/Off switch by pressing

the triggerswitch (A) and then pressing knob

(B). Release the switch-lock by pressing the

triggerswitch (A) shortly.

Speed-control

• The rotation-speed can be continuously

adjusted between 0 and 2600 rotations per

minute by pressing the switch (A) deeper or

less deep.

40 Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fpd 13 500 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm fpd 13 500 Manual

Product: