Manual Ferm fjs 750 l (page 12 of 60) (English, German, Dutch, French, Italian)

382948

Zoom out

Zoom in

1/60

Ferm 109

3. MONTERING AF TILBEHØR

Valg af sav

Stiksaven er udstyret med 3 save, hver med forskellige tænder. Profilen og tænderne

varierer med det materiale De vil skære i. Fine savtænder vil give Dem et glat og præcist

snit. Brug en smal profil hvis De vil save kurver eller vil save figurer. Maksimumtykkelsen

af arbejdsemnet er 70 mm (for træ). Maksimumtykkelsen er 110 mm med særlige

savklinger. Ved valget af den rette sav, gå frem som følger:

• Prøv først en sav med grove savtænder.

• Hvis De ikke får et glat og præcist snit, prøv da en sav med finere savtænder.

• Til plastik, aluminium og stål brug altid en sav med meget fine savtænder.

Som regel vil De arbejde hurtige men mindre præcist med grove savtænder end De vil

med fine savtænder. For det bedste resultat, sørg altid for at saven er skarp. Stiksaven er

egnet til alle de savklinger der kan fås i handelen.

Savklinge Type arbejdsemne

Grov Træ

Middel Træ

Fin Kunststof, aluminium, stål

Meget fin Savning af kurver (træ)

Montering af savklinge

Fig. 2a + 2b

Før du monterer savklingen, skal du se efter, om stikket er taget ud af

kontakten.

Udskiftning/isætning af savklinge:

• Træk håndtaget (7) opad

• Sæt savklingen (tænderne skal vende i saveretningen), ind i stempelstangen, indtil

det låses fast. Når du sætter savklingen i, skal du være opmærksom på, at bagsiden

af savklingen skal anbringes i rillen på styrerullen.

• Slip håndtaget; savklingen (10) er nu låst.

Afmontering af savklingen:

• For at afmontere savklingen, skal håndtaget trækkes opad, samtidigt med at

savklingen fjernes fra maskinen.

Indstil vinklen pä bundpladen

Fig. 3a + 3b

Indstil vinklen på bundpladen (6) som følger:

A. Løsne de to umbrakoskruer (12) med den medfølgende sekskantnøgle.

B. Træk bundpladen en lille smule tilbage for at løsne den.

Ferm

Cleaning

Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the

ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth

moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water,

etc. These solvents may damage the plastic parts.

Faults

Should a fault occur, e.g. after wear of a part, please contact the service address on the

warranty card. In the back of this manual you find an exploded view showing the parts

that can be ordered.

Environment

To prevent damage during transport, the appliance is

delivered in a solid packaging which consists largely of reusable material. Therefore

please make use of options for recycling the packaging.

Faulty and/or discarded electrical or electronic apparatus have to be collected

at the appropriate recycling locations.

Warranty

The warranty conditions can be found on the separately enclosed warranty card.

• It is very difficult to move

the workpiece along the

saw blade in a straight

line and the saw cut is

uneven.

• The workpiece is starting

to vibrate violently during

sawing.

• The appliance runs noisily

and/or very unevenly.

• The saw blade is warped

or blunt.

• The saw blade is

overheated or distorted.

• The carbon brushes are

worn.

• Replace the saw blade.

• Contact the service

address on the warranty

card.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fjs 750 l in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 26,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm fjs 750 l Manual

Product: