110196
8
Zoom out
Zoom in
Previous page
1/108
Next page
8
EN
Material Pendulum position
Wood 1-3
Plastics 1
Aluminium 0-1
Steel 0
Ceramics 0
Rubber 0

Insert the dust extraction adapter (18) into the
dust extraction connection (9).
Connect the hose of a vacuum cleaner to the
dust extraction adapter (18).
Hints for optimum use
Clamp the workpiece. Use a clamping device
for small workpieces.
Draw a line to dene the direction in which to
guide the saw blade.
Firmly hold the machine by the grip.
Set the sawing speed.
Set the mitre angle.
Set the pendulum position.
Switch on the machine.
Wait until the machine has reached full speed.
Place the saw shoe on the workpiece.
Slowly move the machine along the pre-drawn
line, rmly pressing the saw shoe against the
workpiece.
Do not apply too much pressure on the
machine. Let the machine do the work.
Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
3
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
Regularly clean the housing with a soft cloth.
Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
Regularly clean the saw blade to avoid
inaccuracies during use.
Regularly lubricate the guide roller.

Worn or damaged saw blades must be replaced
immediately.
2
Only use sharp and undamaged saw
blades.
To remove the old saw blade (14), proceed as
described in the section „Mounting and
removing the saw blade“.
To mount the new saw blade (14), proceed as
described in the section „Mounting and
removing the saw blade“.
WARRANTY
Consult the enclosed warranty terms.
ENVIRONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm FDJS-710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FDJS-710 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info