110196
7
Zoom out
Zoom in
Previous page
1/108
Next page
7
EN
ASSEMBLY
3
Before assembly, always switch off the
machine and remove the mains plug
from the mains.

Refer to the table below to select the required
saw blade.
Saw blade Material
Coarse Wood
Medium Wood
Fine Steel, aluminium, plastic
Very ne Wood (curves)
2
Do not attempt to remove the guard from
the machine.
Mounting
Slacken the Allen screw (13) using the Allen
key (11).
Insert the saw blade (14) in the saw blade
holder (6) as far as possible. The teeth of the
saw blade (14) must point upward and
forward. The smooth side of the saw blade
must engage in the slot of the guide roller (15).
Tighten the Allen screw (13) using the Allen
key (11).
Removing
Slacken the Allen screw (13) using the Allen
key (11).
Remove the saw blade (14) from the saw
blade holder (6).
Tighten the Allen screw (13) using the Allen
key (11).
Mounting and removing the parallel guide

The parallel guide is used for sawing along edges
at a maximum distance of 16 cm.
Mounting
Slacken the locking bolts (8).
Insert the parallel guide (16) into the saw shoe
(7).
Set the parallel guide (16) to the required
position.
Tighten the locking bolts (8).
Removing
Slacken the locking bolts (8).
Remove the parallel guide (16) from the saw
shoe (7).
Tighten the locking bolts (8).
USE

To switch on the machine, press the on/off
switch (1).
To switch the machine to continuous mode,
keep the on/off switch (1) pressed and
simultaneously press the lock-on button (2).
To switch off the machine, release the on/off
switch (1).

The speed adjustment wheel is used for setting
the sawing speed. The speed adjustment wheel
can be set to 6 positions. The ideal sawing speed
depends on the prole and the teeth of the saw
blade and on the material to be worked.
2
Do not set the sawing speed during use.
Turn the speed adjustment wheel (3) to the
required position.
For hard materials, use a saw blade with ne
teeth and select a lower speed.
For soft materials, use a saw blade with
coarse teeth and select a higher speed.

The mitre angle is variable between 0° and 45°.
2
Do not set the mitre angle during use.
Slacken the Allen screws (17) using the Allen
key (11).
Tilt the saw shoe (7) to the required position.
Tighten the Allen screws (17) using the Allen
key (11).

The pendulum action switch is used to set the
way in which the teeth of the saw blade grip the
material. The pendulum action switch can be set
to 4 positions.
2
Do not set the pendulum position during
use.
Turn the pendulum action switch (4) to
required position according to the material to
be worked. Refer to the table below to select
the required position.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm FDJS-710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FDJS-710 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info