79265

Ferm FDCS 720 L Manual

5
Zoom out
Zoom in
Previous page
1/124
Next page
5
EN
2. SAFETY INSTRUCTIONS
Explanation of the symbols
DESCRIPTION (FIG. A)
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
The number of revolutions of the
machine can be electronically set.
Do not use in rain.
Indoor use only
In case of failure, the transformer is not
dangerous
Do not dispose of in household waste.
Specific safety instructions
• This appliance is not intended for use by
persons (including children) with reduced
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instructions
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Important safety notes on charger and internal
battery
If you come in contact with acid from the
battery, rinse it off with water
immediately. If acid gets into your eyes,
rinse out your eyes at once with water
and contact a doctor immediately!
1. Read and note the operating instructions and
safety notes for the charger and internal
battery before use!
2. NB! Only use the charger that was supplied by
the manufacturer - otherwise you will risk an
accident.
3. Protect the charger and power tool from
moisture, e.g. rain or snow.
4. Always check that all cables are connected
correctly before using the charger.
5. If you discover that a cable is damaged, you
should not use the charger again. Have the
damaged cable replaced immediately.
6. When the charger is not in use, the mains plug
should be removed from the power socket. Do
not pull out the plug by grasping the cable.
7. If the charger has been dropped or has
otherwise been exposed to high mechanical
stresses, you should have it checked for
damage by an authorized dealer before using
it again. Damaged parts should be repaired.
8. Exercise caution when handling the tool and
do not drop it or expose it to impacts.
9. Never attempt to repair the charger or internal
battery yourself. Repairs must always be
carried out by an authorized dealer - otherwise
you risk an accident.
10. Before cleaning or servicing the charger,
always pull the plug from the charger socket.
11. Never charge the tool when the ambient
temperature is below 5° C or above 40° C.
12. Never throw the tool onto a re or into water.
This will risk explosion!
Electrical safety
Always check that the voltage on the
battery pack corresponds to the voltage
on the rating plate. Also check that your
mains voltage corresponds to the input
voltage of the battery charger.
Class II machine - Double insulation -
You don’t need any earthed plug.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm FDCS 720 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FDCS 720 L in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 22,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info